RAINSVILLE, AL —
OSHA Inspection: RAINSVILLE TECHNOLOGY, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of RAINSVILLE TECHNOLOGY, INC. in 189 RTI DRIVE, RAINSVILLE, AL 35986 (NAICS 326199). OSHA activity number 336176987.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- RAINSVILLE TECHNOLOGY, INC.
- Site address
- 189 RTI DRIVE
- City
- RAINSVILLE
- State
- AL
- ZIP
- 35986
- Mailing
- 189 RTI DRIVE, RAINSVILLE, AL 35986
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 326199
- Employees
- 457
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.212 A01
- Issued
- Oct 16, 2012
- Abate by
- Oct 23, 2012
- Penalty
- Initial $3,750 · Current $2,250 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: (a) On or about 09/04/12 - Maintenance Shop, a Sharp milling & drilling machine did not have a chuck or spindle guard installed.
Recent events (2)
- — I (S) $2250
- — Z (S) $3750
1910.215 B09
- Issued
- Oct 16, 2012
- Penalty
- Initial $3,000 · Current $1,800 Reduced
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one-fourth inch: (a) On or about 09/04/12 - Maintenance Shop, the tongue guards on the pedestal-mounted abrasive grinder were not adjusted to at least one-fourth inch.
Recent events (2)
- — I (S) $1800
- — Z (S) $3000
1910.242 B
- Issued
- Oct 16, 2012
- Abate by
- Oct 23, 2012
- Penalty
- Initial $2,250 · Current $1,350 Reduced
General-duty citation text
29 CFR 1910.242(b): Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i.: (a) On or about 09/04/12 - A-5, A-7, E-2 and F-1 Injection Molding Machines, compressed air was used with an output of 40 to 70 p.s.i. to clean out hoppers.
Recent events (2)
- — I (S) $1350
- — Z (S) $2250
1910.303 G02 I
- Issued
- Oct 16, 2012
- Abate by
- Oct 23, 2012
- Penalty
- Initial $3,750 · Current $2,250 Reduced
General-duty citation text
29 CFR 1910.303(g)(2)(i): Except as elsewhere required or permitted by Subpart S of Part 1910, live parts of electric equipment operating at 50 volts or more were not guarded against accidental contact by use of approved cabinets or other forms of approved enclosures or by any of the means identified in paragraphs (A), (B), (C), and (D) of 29 CFR 1910.303(g)(2)(i): (a) On or about 09/04/12 - A-7 Injection Molding Machine, a 110-volt electrical fan switch/outlet box was not closed.
Recent events (2)
- — I (S) $2250
- — Z (S) $3750
1910.303 B02
- Issued
- Oct 16, 2012
- Abate by
- Oct 23, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling: (a) On or about 09/04/12 - A-7 Injection Molding Machine, a 110-volt electrical fan switch/outlet box was not listed or rated for use. (b) On or about 09/04/12 - Injection Molding Machines, several 110-volt electrical outlet boxes were not listed or rated for use.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at Rainsville Technology, INC.
View Rainsville Technology, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 326199)
More inspections in AL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 336176987.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.