SPRING, TX —
OSHA Inspection: ROBERTO CARLOS SIGARAN
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of ROBERTO CARLOS SIGARAN in TATTON CREST COURT, SPRING, TX 77379 (NAICS 238140). OSHA activity number 336182183.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ROBERTO CARLOS SIGARAN
- Site address
- TATTON CREST COURT
- City
- SPRING
- State
- TX
- ZIP
- 77379
- Mailing
- P.O. BOX 630006, HOUSTON, TX 77263
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238140
- Employees
- 3
- Ownership type
- A
Citations
3 citations on file for this inspection.
1926.451 C02
- Issued
- Sep 20, 2012
- Abate by
- Sep 21, 2012
- Penalty
- Initial $2,000 · Current $2,000
General-duty citation text
29 CFR 1926.451(c)(2): Supported scaffold poles, legs, posts, frames, or uprights did not bear on base plates, mud sills or other adequate firm foundation: The employer does not provide the scaffold with base plates, mud sills or other adequate firm foundation. This violation was observed on or about September 4, 2012, on the newly construction of a residential home where employees were exposed to a fall hazard when required to conduct brick work at a height of 13 feet without base plates, mud sills or firm foundation. Pursuant to 29 C.F.R. 1903.19, within ten (10) calendar days of the abatement date, the employer must submit documentation showing that it is in compliance with the standard, including describing the steps that it is taking to ensure that supported poles, legs, posts, frames, or uprights are on base plates, mud sills or other adequate firm foundation.
Recent events (1)
- — Z (S) $2000
1926.451 E01
- Issued
- Sep 20, 2012
- Abate by
- Sep 21, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.451(e)(1): When scaffold platforms were more than 2 feet (0.6 m) above or below a point of access, portable ladders, hook-on ladders, attachable ladders, stair towers (scaffold stairways/towers), stairway-type ladders (such as ladder stands), ramps, walkways, integral prefabricated scaffold access, or direct access from other scaffold, structure, personnel hoist, or similar surface was not used. Crossbraces were used as a means of access. The employer does not provide employees with access to the scaffold platform. This violation was observed on or about September 4, 2012, on the newly construction of a residential home where employees were exposed to a fall hazard when accessing the platform at a height of 13 feet without a ladder. Pursuant to 29 C.F.R. 1903.19, within ten (10) calendar days of the abatement date, the employer must submit documentation showing that it is in compliance with the standard, including describing the steps that it is taking to ensure that when scaffold platforms are 2 feet above or below a point of access, portable ladders, hook-on ladders, attachable ladders or similar surface is used.
Recent events (1)
- — Z (S) $0
1926.451 G04 I
- Issued
- Sep 20, 2012
- Abate by
- Sep 21, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.451(g)(4)(i): Guardrail systems were not installed along all open sides and ends of platforms. The employer does not install guard rails on the scaffold. This violation was observed on or about September 4, 2012, on the newly construction of a residential home where employees were exposed to a fall hazard when required to conduct mansory work from a platform of 13 feet without a guard rail system. Pursuant to 29 C.F.R. 1903.19, within ten (10) calendar days of the abatement date, the employer must submit documentation showing that it is in compliance with the standard, including describing the steps that it is taking to ensure that guardrail systems are install along open sides and ends of platforms.
Recent events (1)
- — Z (S) $0
More inspections in this industry (NAICS 238140)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 336182183.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.