MASPETH, NY —
OSHA Inspection: CONTINENTAL TRUCK BODY CORP.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of CONTINENTAL TRUCK BODY CORP. in 61-50 MAURICE AVE., MASPETH, NY 11378 (NAICS 336211). OSHA activity number 336187190.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CONTINENTAL TRUCK BODY CORP.
- Site address
- 61-50 MAURICE AVE.
- City
- MASPETH
- State
- NY
- ZIP
- 11378
- Mailing
- 61-50 MAURICE AVE., MASPETH, NY 11378
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 336211
- Employees
- 25
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.23 C02
- Issued
- Jan 28, 2013
- Abate by
- Feb 7, 2013
- Penalty
- Initial $2,000 · Current $1,400 Reduced
General-duty citation text
29 CFR 1910.23(c)(2): Runways four feet or more above floor or ground level were not guarded by standard railings (or the equivalent) and the runway is less than 18 inches wide: a) Building One - Employees constructing the box portion of a box truck were working from an unguarded scaffold/runway one plank wide over seven feet off the ground; on or about 09/06/12. NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM IN THE ACCORDANCE WITH 29 CFR 1903.19
Recent events (2)
- — I (S) $1400
- — Z (S) $2000
1910.212 A03 II
- Issued
- Jan 28, 2013
- Abate by
- Feb 1, 2013
- Penalty
- Initial $2,800 · Current $1,960 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): (a) Building One - 'The Original' Radial Saw was not provided with a guard for the lower portion of the blade; on or about 09/06/12. NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM, FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $ 1,000.00 AS PER 29 CFR 1903.19.
Recent events (2)
- — I (S) $1960
- — Z (S) $2800
1910.213 D01
- Issued
- Jan 28, 2013
- Abate by
- Feb 1, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(d)(1): Circular handfed crosscut table saw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut: (a) Building One - A Rockwell 12/14 tilting arbor saw used to cut plywood did not have a self-adjusting hood and/or a means of affixing one to the saw; on or about 09/06/13. NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM, FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $ 1,000.00 AS PER 29 CFR 1903.19.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.213 C03
- Issued
- Jan 28, 2013
- Abate by
- Feb 1, 2013
- Penalty
- Initial $2,000 · Current $1,400 Reduced
General-duty citation text
29 CFR 1910.213(c)(3): Hand-fed ripsaw(s) did not have non kickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator: (a) Building One A Rockwell 12/14 tilting arbor saw did not have non kickback fingers or dogs; on or about 09/06/12. NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM IN THE ACCORDANCE WITH 29 CFR 1903.19
Recent events (2)
- — I (S) $1400
- — Z (S) $2000
More inspections in this industry (NAICS 336211)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 336187190.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.