OSHA Inspection: MASTER SHEET METAL

Issued

Feb 28, 2013

Abate by

Mar 19, 2013

Penalty

Initial $2,200 · Current $2,200

General-duty citation text

29 CFR 1910.303(g)(2)(i):  Except as elsewhere required or permitted by Subpart S of Part 1910, live parts of electric equipment operating  at 50 volts or more were not guarded against accidental contact by use of approved cabinets or other forms of approved enclosures or by any of the means identified in paragraphs (A), (B), (C), and (D) of 29 CFR 1910.303(g)(2)(i):     Inspection Date:  09/07/2012    Located at 248 E. 125th Street, New York, NY    a)   Two wire conductors had live exposed parts which were inserted into a duplex outlet receptacle.  The receptacle was dangling from its cords and not mounted and was attached thru a side opening in the electric panelboard.        NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM, FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1,000.00 AS PER 29

Issued

Feb 28, 2013

Abate by

Mar 19, 2013

Penalty

Initial $1,760 · Current $1,760

General-duty citation text

29 CFR 1910.305(a)(2)(ix): All lamps for general illumination were not protected from accidental contact or breakage by a suitable fixture or lampholder with a guard. Brass shell, paper-lined sockets, or other metal-cased sockets may not be used unless the shell is grounded.    Inspection Date:  09/07/2012    Located at 248 E. 125th Street, New York, NY    a)   Temporary lights used for general illumination in the basement area were not protected by a cover.  Light bulbs were hanging from their cords next to the sheet metal bending machines.    b)   A Two bulb florescent flush mount light fixture was not equipped with a cover in the basement area.      NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM, FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1,000.00 AS PER 29 CFR 1903.19.

Issued

Feb 28, 2013

Penalty

Initial $2,200 · Current $2,200

General-duty citation text

29 CFR 1910.305(j)(2)(i):  Receptacles, cord connectors and attachment plugs were not constructed so that they would not accept an attachment plug with a different voltage or current rating than that for which the device was intended: ollow Up     Inspection Date:  09/07/2012    Located at 248 E. 125th Street, New York, NY    a)   Flexible cords used to energize tools and equipments were not equipped with an attachment plug.  Bare wires were used as a plug.      NOTE: BECAUSE ABATEMENT OF THIS VIOLATION IS ALREADY DOCUMENTED IN THE CASEFILE, THE EMPLOYER NEED NOT SUBMIT CERTIFICATION NOR DOCUMENTATION OF ABATEMENT OF THIS VIOLATION AS NORMALLY REQUIRED BY 29 CFR 1903.19.