WALNUT, IL —
OSHA Inspection: EBE INDUSTRIAL
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of EBE INDUSTRIAL in 507 W. NORTH SREET, WALNUT, IL 61376 (NAICS 332999). OSHA activity number 336270384.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- EBE INDUSTRIAL
- Site address
- 507 W. NORTH SREET
- City
- WALNUT
- State
- IL
- ZIP
- 61376
- Mailing
- 507 W. NORTH SREET, WALNUT, IL 61376
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332999
- Employees
- 15
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.151 C
- Issued
- Nov 19, 2012
- Abate by
- Dec 23, 2012
- Penalty
- Initial $1,600 · Current $1,120 Reduced
General-duty citation text
29 CFR 1910.151(c): Where employees were exposed to injurious corrosive materials, suitable facilities for quick drenching or flushing of the eyes and body were not provided within the work area for immediate emergency use: An adequate eye wash or facilities for flushing of the eyes was not available in the area where water is added to the forklift battery. Abatement certification is required for this item in accordance with 29 CFR 1903.19(c).
Recent events (2)
- — I (S) $1120
- — Z (S) $1600
1910.212 A01
- Issued
- Nov 19, 2012
- Abate by
- Dec 23, 2012
- Penalty
- Initial $1,200 · Current $840 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: The Lodge & Shipley Lathe, serial number 46785, the Jet Lathe, serial number JS099, and the Monarch Lathe, serial number 22611, were not equipped with chuck/chip guards. Abatement certification is required for this item in accordance with 29 CFR 1903.19(c).
Recent events (2)
- — I (S) $840
- — Z (S) $1200
1910.253 B04 III
- Issued
- Nov 19, 2012
- Abate by
- Dec 23, 2012
- Penalty
- Initial $1,200 · Current $840 Reduced
General-duty citation text
29 CFR 1910.253(b)(4)(iii): Oxygen cylinders in storage were not separated from fuel-gas cylinders or combustible materials (especially oil or grease), a minimum distance of 20 feet (6.1 m) or by a noncombustible barrier at least 5 feet (1.5 m) high having a fire-resistance rating of at least one-half hour: Oxygen and acetylene cylinders were stored together and were not separated by 20 feet or a fire-resistant barrier Abatement certification is required for this item in acordance with 29 CFR 1903.19(c).
Recent events (2)
- — I (S) $840
- — Z (S) $1200
1910.147 C04 I
- Issued
- Nov 19, 2012
- Abate by
- Dec 23, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: EBE Industrial did not develop specific lockout procedures for the control of potentially hazardous energy. Abatement documentation is required for this item in accordance with 29 CFR 1903.19(d).
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.178 L04 III
- Issued
- Nov 19, 2012
- Abate by
- Dec 23, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(4)(iii): An evaluation of each powered industrial truck operators performance was not conducted at least once every 3 years: EBE Industrial did not conduct an evaluation of each forklift driver's performance within the past 3 years. Abatement certification is required for this item in accordance with 29 CFR 1903.19(c).
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.1200 E01
- Issued
- Nov 19, 2012
- Abate by
- Jan 8, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met: EBE Industrial did not develop a written hazard communication program. Abatement documentation is required for this item in accordance with 29 CFR 1903.19(d).
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections in this industry (NAICS 332999)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 336270384.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.