JACKSONVILLE, FL —
OSHA Inspection: PARKER-HANNIFIN CORPORATION
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of PARKER-HANNIFIN CORPORATION in 2575 W 5TH STREET, JACKSONVILLE, FL 32254 (NAICS 336413). OSHA activity number 336299011.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- PARKER-HANNIFIN CORPORATION
- Site address
- 2575 W 5TH STREET
- City
- JACKSONVILLE
- State
- FL
- ZIP
- 32254
- Mailing
- 2575 W 5TH STREET, JACKSONVILLE, FL 32254
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- Yes
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 336413
- Employees
- 76
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.215 A02
- Issued
- Nov 8, 2012
- Abate by
- Dec 6, 2012
- Penalty
- Initial $20,000 · Current $0 Reduced
General-duty citation text
The Parker-Hannifin Corporation was previously cited for a violation of this Occupational Safety and Health standard or its equivalent standard 1910.212(a)(1) which was contained in OSHA inspection number 313634263 citation number 02, item number 006, issued on 05/02/2011, with a final order date of July 26, 2011, with respect to a workplace located at 1620 Highway 6 East, Batesville, MS. 29 CFR 1910.215(a)(2): Abrasive wheel(s) used on grinding machinery were not provided with safety guard(s) which covered the spindle end, nut, flange projections: a. On or about September 10, 2012, in the Deburr Area, the abrasive wheel grinding machines did not have a guard on the spindle ends and nuts, exposing employees to a caught in hazard.
Recent events (2)
- — I (R) $0
- — Z (R) $20000
1910.215 A04
- Issued
- Nov 8, 2012
- Abate by
- Dec 6, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
The Parker-Hannifin Corporation was previously cited for a violation of this Occupational Safety and Health standard or its equivalent standard 1910.215(a)(4) which was contained in OSHA inspection number 313634263 citation number 01, item number 009, issued on 05/02/2011, with a final order date of July 26, 2011, with respect to a workplace located at 1620 Highway 6 East, Batesville, MS. 29 CFR 1910.215(a)(4): Grinding machinery was not used with work rest(s) to support offhand grinding work: a. On or about September 10, 2012, in the Deburr Area, the abrasive wheel grinding machines did not have a work rest. b. On or about September 10, 2012, in the Deburr Area, the abrasive belt grinding machine did not have a work rest.
Recent events (2)
- — I (R) $0
- — Z (R) $0
1910.215 B09
- Issued
- Nov 8, 2012
- Abate by
- Dec 6, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
The Parker-Hannifin Corporation was previously cited for a repeat violation of this Occupational Safety and Health standard or its equivalent standard 1910.215(b)(9) which was contained in OSHA inspection number 313634263 citation number 02, item number 008, issued on 05/02/2011, with a final order date of July 26, 2011, with respect to a workplace located at 1620 Highway 6 East, Batesville, MS. 29 CFR 1910.215(b)(9): Safety guards of the types described in Subparagraphs (3) and (4) of this paragraph, where the operator stands in front of the opening, was not constructed so that the peripheral protecting member could be adjusted to the constantly decreasing diameter of the wheel: a. On or about September 10, 2012, in the Deburr Area, the abrasive wheel grinding machines did not have a tongue guard.
Recent events (2)
- — I (R) $0
- — Z (R) $0
1910.219 D01
- Issued
- Nov 8, 2012
- Penalty
- Initial $20,000 · Current $1,000 Reduced
General-duty citation text
The Parker-Hannifin Corporation was previously cited for a violation of this Occupational Safety and Health standard or its equivalent standard 1910.219(d)(1) which was contained in OSHA inspection number 312752736 citation number 01, item number 001, issued on 01/08/2009, with a final order date of January 27, 2009, with respect to a workplace located at 9 Cutts Road, Kittery, ME. 29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o): a. On or about September 10, 2012, in the Research and Development Area, four rotary flex machines did not have a guard on the belt and pulley, exposing employees to the in-going nip points.
Recent events (2)
- — I (O) $1000
- — Z (R) $20000
More inspections at Parker-Hannifin Corporation
View Parker-Hannifin Corporation's full OSHA safety record →
More inspections in this industry (NAICS 336413)
More inspections in FL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 336299011.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.