Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: DIVERSIFIED MACHINE, INC.

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of DIVERSIFIED MACHINE, INC. in 2039 S. LENOX STREET, MILWAUKEE, WI 53207 (NAICS 331528). OSHA activity number 336362587.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Diversified Machine, INC. — free Get an email when a new federal OSHA severe-injury report for Diversified Machine, INC. is published. One employer, no account, unsubscribe in one click.
Site address
2039 S. LENOX STREET
City
MILWAUKEE
State
WI
ZIP
53207
Mailing
2039 S. LENOX STREET, MILWAUKEE, WI 53207
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
331528
Employees
122
Ownership type
A

4 citations on file for this inspection.

1910.147 F01

Serious Gravity 10 1 instance 1 exposed
Issued
Nov 15, 2012
Abate by
Nov 28, 2012
Penalty
Initial $7,000 · Current $3,500 Reduced
29 CFR 1910.147(f)(1):     When lockout or tagout devices temporarily were removed from the energy isolating device and the machine or equipment was energized to test or position the machine, equipment or component thereof, the sequence of actions were not followed:      (a) The employer did not ensure that all affected employees were removed from the hazardous area prior to testing equipment, such as by conducting a visual inspection of the area to identify personnel. On or about 8/17/2012 during maintenance/servicing on the Hall Machine #24, affected employee(s) were not informed of the actuation of the Hall Molding Machine's cylinders, exposing employee(s) to crushing and/or amputation hazards.
Recent events (2)
  • — I (S) $3500
  • — Z (S) $7000

1910.147 C04 II B

Serious Gravity 10 1 instance 2 exposed
Issued
Nov 15, 2012
Abate by
Nov 28, 2012
Penalty
Initial $0 · Current $0
29 CFR 1910.147(c)(4)(ii)(B):     The energy control procedures did not clearly and specifically outline the steps for shutting down, isolating, blocking and securing machines or equipment to control hazardous energy.    (a)  The energy control procedures for equipment such as but not limited to the Hall Machine #24 did not specify notifying affected personnel in the area of maintenance and/or servicing on machinery and the need for shutting down. Employees were exposed to crushing and/or amputation hazards.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.147 C06 I

Repeat Gravity 10 1 instance 1 exposed
Issued
Nov 15, 2012
Abate by
Dec 5, 2012
Penalty
Initial $13,860 · Current $6,500 Reduced
29 CFR 1910.147(c)(6)(i):     The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed:    (a) The employer did not ensure the energy control procedures were reviewed at least annually to ensure compliance with the standard was accomplished. Employees were exposed to crushing and/or amputation hazards from deficiencies in the lockout/tagout program.     DIVERSIFIED MACHINE INC. DBA DMI COLUMBUS LLC WAS PREVIOUSLY CITED FOR A VIOLATION OF THIS OCCUPATIONAL SAFETY AND HEALTH STANDARD OR ITS EQUIVALENT STANDARD [29 CFR 1910.147(c)(6)(i)], WHICH WAS CONTAINED IN OSHA INSPECTION NUMBER 311404628, CITATION NUMBER 1, ITEM NUMBER 5B AND WAS AFFIRMED AS A FINAL ORDER ON JUNE 22, 2012, WITH RESPECT TO A WORKPLACE LOCATED AT 1600 NORTHSIDE INDUSTRIAL BLVD., COLUMBUS, GEORGIA.
Recent events (2)
  • — I (R) $6500
  • — Z (R) $13860

1910.1030 G02 II B

Other-than-serious 1 instance 1 exposed
Issued
Nov 15, 2012
Abate by
Dec 5, 2012
Penalty
Initial $0 · Current $0
29 CFR 1910.1030(g)(2)(ii)(B):     The employer did not ensure that training provided to employees with occupational exposure was conducted at least annually.    (a)  Bloodborne pathogens and first aid training had not been provided since about September of 2010 to designated responders.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View Diversified Machine, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 336362587.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.