Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: CLYDE ELECTRICAL AND MECHANICAL

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of CLYDE ELECTRICAL AND MECHANICAL in 1828 N ST MARY'S STREET, SAN ANTONIO, TX 78212 (NAICS 238210). OSHA activity number 336411186.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Clyde Electrical and Mechanical — free Get an email when a new federal OSHA severe-injury report for Clyde Electrical and Mechanical is published. One employer, no account, unsubscribe in one click.
Site address
1828 N ST MARY'S STREET
City
SAN ANTONIO
State
TX
ZIP
78212
Mailing
811 RUSSELL PALMER ROAD, KINGWOOD, TX 77339
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238210
Employees
4
Ownership type
A

5 citations on file for this inspection.

1926.102 A01

Serious Gravity 5 1 instance 1 exposed
Issued
Feb 5, 2013
Abate by
Feb 13, 2013
Penalty
Initial $2,400 · Current $2,000 Reduced
29 CFR 1926.102(a)(1): Eye and face protective equipment were not used when machines or operations presented potential eye or face injury:         a)  On or about September 17, 2012, an employee was in the office area operating a Ryobi P510 18V cordless reciprocating saw.  The employee's face was approximately two feet away from the floor when he was cutting away the PVC piping and concrete and not wearing safety glasses exposing himself to injury to his eyes and face.
Recent events (2)
  • — I (S) $2000
  • — Z (S) $2400

1926.403 I01 II

Serious Gravity 10 1 instance 4 exposed
Issued
Feb 5, 2013
Abate by
Feb 9, 2013
Penalty
Initial $2,800 · Current $2,320 Reduced
29 CFR 1926.403(i)(1)(ii): Working space about electric equipment operating at 600 volts, nominal, or less was used for storage:        On or about September 17, 2012, employees were exposed to live wire when storing a Werner fiberglass step ladder with conductive parts in the panel room.
Recent events (2)
  • — I (S) $2320
  • — Z (S) $2800

1926.403 I02 III

Deleted Serious Gravity 10 1 instance 2 exposed
Issued
Feb 5, 2013
Abate by
Feb 9, 2013
Penalty
Initial $2,800 · Current $0 Reduced
29 CFR 1926.403(i)(2)(iii): Entrances to rooms and other guarded locations containing exposed live parts operating at 600 volts, nominal, or less were not marked with conspicuous warning signs forbidding unqualified persons to enter:          a)  On or about September 17, 2012, employees were exposed to live wire when the entrance to the circuit room did not have warning signs to prevent them from entering.
Recent events (2)
  • — I (S) $0
  • — Z (S) $2800

1926.416 A03

Deleted Serious Gravity 10 1 instance 4 exposed
Issued
Feb 5, 2013
Abate by
Feb 9, 2013
Penalty
Initial $0 · Current $0
29 CFR 1926.416(a)(3): Employer did not post or maintain proper warning signs at locations where the performance of the work could bring a person, tool, or machine into physical or electrical contact with an energized electrical power circuit:        a)  On or about September 17, 2012, employees were working on the panel and were exposed to an electrical shock when the power circuit was energized.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.416 A01

Deleted Serious Gravity 10 1 instance 4 exposed
Issued
Feb 5, 2013
Abate by
Feb 9, 2013
Penalty
Initial $2,800 · Current $0 Reduced
29 CFR 1926.416(a)(1): Employees were permitted to work in proximity to electric power circuits and were not protected against electric shock by de-energizing and grounding the circuits or effectively guarding the circuits by insulation or other means:                                                                                                 a)  On or about September 17, 2012, employees were either working in the electrical room or were approximately 3 feet away from the open door which was not locked exposing employees to energized parts.
Recent events (2)
  • — I (S) $0
  • — Z (S) $2800

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 336411186.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.