ARCADIA, CA —
OSHA Inspection: USDA FOREST SERVICE - ANGELES NF
Unprogrammed Other inspection · Safety discipline
At a glance
On , OSHA opened an unprogrammed Other safety inspection of USDA FOREST SERVICE - ANGELES NF in 701 N. SANTA ANITA AVE BLD 2105, ARCADIA, CA 91006 (NAICS 115310). OSHA activity number 336427380.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- USDA FOREST SERVICE - ANGELES NF
- Site address
- 701 N. SANTA ANITA AVE BLD 2105
- City
- ARCADIA
- State
- CA
- ZIP
- 91006
- Mailing
- 701 N. SANTA ANITA AVE, ARCADIA, CA 91006
What kind of inspection was it?
- Inspection type
- Unprogrammed Other (I)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 115310
- Employees
- 14
- Ownership type
- D
Citations
6 citations on file for this inspection.
1910.215 A04
- Issued
- Nov 6, 2012
- Abate by
- Nov 27, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch: Bldg. 2105: On or about 12SEP12, 1221hrs, a bench grinder was used without adjusting the work rest to a maximum opening of one eighth inch.
Recent events (1)
- — Z (S) $0
1910.215 B09
- Issued
- Nov 6, 2012
- Abate by
- Nov 27, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(b)(9): Exposure adjustment: Safety guards of the types described in Subparagraphs (3) and (4) of this paragraph, where the operator stands in front of the opening, shall be constructed so that the peripheral protecting member can be adjusted to the constantly decreasing diameter of the wheel. The maximum angular exposure above the horizontal plane of the wheel spindle as specified in paragraphs (b)(3) and (4) of this section shall never be exceeded, and the distance between the wheel periphery and the adjustable tongue or the end of the peripheral member at the top shall never exceed one-fourth inch. (See Figures O-18, O-19, O-20, O-21, O-22, and O-23.) Bldg. 2105: On or about 12SEP12, 1221hrs, the tongue guard was not adjusted to within on quarter inch of the grinding wheel surface when used by the employees.
Recent events (1)
- — Z (S) $0
1910.242 B
- Issued
- Nov 6, 2012
- Abate by
- Nov 27, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.242(b): Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i.: Bldg. 2105: On or about 12SEP12, 1241hrs, a portable air compressor used by the employees for cleaning was not reduced to less than 30 p.s.i.
Recent events (1)
- — Z (S) $0
1910.305 J01 I
- Issued
- Nov 6, 2012
- Abate by
- Nov 27, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(j)(1)(i): Fixtures, lamp holders, lamps, rosettes, and receptacles located had live parts normally exposed to employee contact: Bldg. 2105: On or about 12SEP12, 1221hrs, live 120VAC conductors were exposed to inadvertent contact by employees by a light fixture on a Sears bench grinder.
Recent events (1)
- — Z (S) $0
1910.1200 E01
- Issued
- Nov 6, 2012
- Abate by
- Nov 27, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met: Bldg. 2105: On or about 12SEP12, 1133hrs, the employer did not provide a hazardous communication program addressing labeling of hazardous chemicals, material safety data sheets, and training addressing the chemicals in the workplace.
Recent events (1)
- — Z (S) $0
1910.1200 G08
- Issued
- Nov 6, 2012
- Abate by
- Nov 27, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(g)(8): The employer did not maintain copies of the required material safety data sheets for each hazardous chemical in the workplace: Bldg. 2105: On or about 12SEP12, 1220hrs, MSDS were not available for aerosol spray cans containing battery and terminal cleaner, and WD-40.
Recent events (1)
- — Z (S) $0
More inspections at Usda Forest Service - Angeles NF
View Usda Forest Service - Angeles NF's full OSHA safety record →
More inspections in this industry (NAICS 115310)
More inspections in CA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 336427380.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.