TOPSHAM, ME —
OSHA Inspection: HILLSON CONTRACTORS INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of HILLSON CONTRACTORS INC. in RUSTY'S, MIDDLESEX ROAD, TOPSHAM, ME 04086 (NAICS 238170). OSHA activity number 336448386.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- HILLSON CONTRACTORS INC.
- Site address
- RUSTY'S, MIDDLESEX ROAD
- City
- TOPSHAM
- State
- ME
- ZIP
- 04086
- Mailing
- 52 FITZGERALD DRIVE, JAFFREY, NH 03452
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238170
- Employees
- 5
- Ownership type
- A
Citations
4 citations on file for this inspection.
1926.304 F
- Issued
- Sep 27, 2012
- Abate by
- Oct 4, 2012
- Penalty
- Initial $2,200 · Current $1,100 Reduced
General-duty citation text
29 CFR 1926.304(f): Section 4.1.2(b) American National Standards Institute 01.1-1961, Safety Code for Woodworking Machinery as adopted by 29 CFR 1926.304(f): Circular hand-fed ripsaws were not guarded by an automatically adjusting hood which completely encloses that portion of the saw above the table and above the material being cut: At the Jobsite - The 8 inch Dewalt table saw was not provided with a hood guard.
Recent events (2)
- — I (S) $1100
- — Z (S) $2200
1926.304 F
- Issued
- Sep 27, 2012
- Abate by
- Oct 4, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.304(f): Section 4.1.2(c) American National Standards Institute 01.1-1961, Safety Code for Woodworking Machinery as adopted by 29 CFR 1926.304(f): Circular hand-fed rip saws did not have non-kickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator: At the Jobsite - The 8 inch Dewalt table saw was not proivced with non-kickback fingers.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.304 F
- Issued
- Sep 27, 2012
- Abate by
- Sep 30, 2012
- Penalty
- Initial $1,760 · Current $880 Reduced
General-duty citation text
29 CFR 1926.304(f): Section 5.1.3.3 American National Standards Institute 01.1-1961, Safety Code for Woodworking Machinery as adopted by 29 CFR 1926.304(f): Electrically driven equipment was not controlled with magnetic switches or other devices that would prevent automatic restarting of the machine after a power failure: At the Jobsite - The electrically driven 8 inch Dewalt table saw was not provided with anti-restart protection.
Recent events (2)
- — I (S) $880
- — Z (S) $1760
1926.600 A03 I
- Issued
- Sep 27, 2012
- Abate by
- Sep 28, 2012
- Penalty
- Initial $1,760 · Current $880 Reduced
General-duty citation text
29 CFR 1926.600(a)(3)(i): Bulldozer and scraper blades, end-loader buckets, dump bodies, or similar equipment were not fully lowered or blocked when being repaired or when not in use: At the Jobsite - The forks of the Lull forklift were not fully lowered when not in use.
Recent events (2)
- — I (S) $880
- — Z (S) $1760
More inspections at Hillson Contractors INC.
View Hillson Contractors INC.'s full OSHA safety record →
More inspections in this industry (NAICS 238170)
More inspections in ME
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 336448386.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.