ROCK ISLAND, IL —
OSHA Inspection: THE BEDDING GROUP, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of THE BEDDING GROUP, INC. in 2350 5TH ST, ROCK ISLAND, IL 61201 (NAICS 337910). OSHA activity number 336505987.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- THE BEDDING GROUP, INC.
- Site address
- 2350 5TH ST
- City
- ROCK ISLAND
- State
- IL
- ZIP
- 61201
- Mailing
- 2350 5TH ST, ROCK ISLAND, IL 61201
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 337910
- Employees
- 80
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.133 A01
- Issued
- Nov 7, 2012
- Abate by
- Nov 20, 2012
- Penalty
- Initial $4,900 · Current $2,500 Reduced
General-duty citation text
29 CFR 1910.133(a)(1): The employer did not ensure that each affected employee uses appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation: Employees were exposed to the eye injuries while using pneumatic staplers and nail guns while manufacturing mattresses without eye protection.
Recent events (2)
- — I (S) $2500
- — Z (S) $4900
1910.147 C04 II
- Issued
- Nov 7, 2012
- Abate by
- Nov 28, 2012
- Penalty
- Initial $3,500 · Current $1,750 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(ii): The energy control procedures did not clearly and specifically outline the scope, purpose, authorization, rules, and techniques to be utilized for the control of hazardous energy, including, but not limited to Items of this section: Employees are exposed to hazardous energy when performing servicing and maintenance tasks on the Bagger because the energy control procedures did not outline specific procedural steps for shutting down and securing machinery, placing and removing lockout or tagout devices, and provide a specific means to verify that the equipment was isolated from all energy sources prior to work on the equipment.
Recent events (2)
- — I (S) $1750
- — Z (S) $3500
1910.219 F03
- Issued
- Nov 7, 2012
- Abate by
- Nov 20, 2012
- Penalty
- Initial $3,500 · Current $1,750 Reduced
General-duty citation text
29 CFR 1910.219(f)(3): Sprocket wheels and chains which were seven (7) feet or less above floors or platforms were not enclosed: Employees are exposed to the hazard of contact with the mesh area of a sprocket and chain on the Sphul Anderson Panel Cutter. A hole had been cut in the enclosure to facilitate maintenance of the blade.
Recent events (2)
- — I (S) $1750
- — Z (S) $3500
1910.242 B
- Issued
- Nov 7, 2012
- Penalty
- Initial $2,800 · Current $0 Reduced
General-duty citation text
29 CFR 1910.242(b): Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i.: Employees using compressed air for cleaning purposes were exposed to injury from blown particles and air embolisms bcause the air pressure was not reduced to less than 30 p.s.i.
Recent events (2)
- — I (O) $0
- — Z (S) $2800
1910.1200 E01
- Issued
- Nov 7, 2012
- Abate by
- Nov 28, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met: Employees were exposed to chemical hazards when using Sarabond 3175 Spray Adhesive other chemicals and a written hazard communication program had not been implemented.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.1200 H02 III
- Issued
- Nov 7, 2012
- Abate by
- Nov 28, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(h)(2)(iii): The employer did not provide information to the employees as to the location and availability of the written hazard communication program, and material safety data sheets required by 29 CFR 1910.1200: Employees were not provided with effective training on the location and availability of the written hazardous communications program, including the location of material safety data sheets.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections in this industry (NAICS 337910)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 336505987.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.