HARTFORD, WI —
OSHA Inspection: MOTION CONTROLS, LLC
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of MOTION CONTROLS, LLC in 1147 WESTERN DRIVE, HARTFORD, WI 53027 (NAICS 333995). OSHA activity number 336643382.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MOTION CONTROLS, LLC
- Site address
- 1147 WESTERN DRIVE
- City
- HARTFORD
- State
- WI
- ZIP
- 53027
- Mailing
- 1147 WESTERN DRIVE, HARTFORD, WI 53027
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 333995
- Employees
- 13
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.147 C01
- Issued
- Jan 17, 2013
- Abate by
- Feb 13, 2013
- Penalty
- Initial $2,000 · Current $1,000 Reduced
General-duty citation text
29 CFR 1910.147(c)(1): The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative: (a) Employees were exposed to caught-in and crushing injuries while servicing and maintain equipment and the employer did not develope an energy control (lockout/tagout) program.
Recent events (2)
- — I (S) $1000
- — Z (S) $2000
1910.147 C04 I
- Issued
- Jan 17, 2013
- Abate by
- Feb 13, 2013
- Penalty
- Initial $2,000 · Current $1,000 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: (a) Employees were exposed to caught-in and crushing injuries while servicing and maintain equipment and the employer did not develope an procedures for the control of potentially hazardous energy.
Recent events (2)
- — I (S) $1000
- — Z (S) $2000
1910.178 Q07
- Issued
- Jan 17, 2013
- Abate by
- Feb 13, 2013
- Penalty
- Initial $2,000 · Current $1,000 Reduced
General-duty citation text
29 CFR 1910.178(q)(7): Industrial trucks were not examined before being placed in service: (a) Employees were exposed to crushing hazards while operating the Mitsubishi LP Forklift and the employer did not ensure that it was inspected daily before being placed into service.
Recent events (2)
- — I (S) $1000
- — Z (S) $2000
1910.212 A01
- Issued
- Jan 17, 2013
- Abate by
- Feb 13, 2013
- Penalty
- Initial $2,000 · Current $1,000 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: (a) Employees were exposed to a struck by hazard while working with long bar stock on the Mori-Seiki (Model CL-200B and Serial #176) CNC machine and the employer did not ensure that the employees were protected from the rotating bar stock.
Recent events (2)
- — I (S) $1000
- — Z (S) $2000
1910.212 A03 II
- Issued
- Jan 17, 2013
- Abate by
- Mar 15, 2013
- Penalty
- Initial $2,000 · Current $1,000 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): (a) Employees were exposed to amputation hazards while working on and around the Mighty USA Inc. CNC Machine (Model #VMC 510 and Serial #3611026) and the employer did not ensure interlocks were properly working and the point of operation was properly guarded. (b) Employees were exposed to amputation hazards while working on and around the two Yang CNC Machines (Model #SMV 1000 and Serial #s Z10891 & Z10960) and the employer did not ensure interlocks were properly working and the point of operation was properly guarded. (c) Employees were exposed to amputation hazards while working on and around the two YCM CNC Machines (Model # GT - 250B and serial #s 0154 & 0109) and the employer did not ensure interlocks were properly working and the point of operation was properly guarded. (d) Employees were exposed to amputation hazards while working on and around the Mazak CNC Machine (Model # Quick Turn 20 and Serial #128795) annd the employer did not ensure interlocks were properly working and the point of operation was properly guarded.
Recent events (2)
- — I (S) $1000
- — Z (S) $2000
1904.29 B01
- Issued
- Jan 17, 2013
- Abate by
- Feb 13, 2013
- Penalty
- Initial $1,000 · Current $0 Reduced
General-duty citation text
29 CFR 1904.29(b)(1): A Log of all recordable work-related injuries and illnesses (OSHA Form 300 or equivalent), was not completed in the detail as required by the regulation. (a) On or about May 5, 2012 and employee sustained a cut at work the required stiches and the employer did not maintain OSHA 300 Logs as required.
Recent events (2)
- — I (O) $0
- — Z (O) $1000
More inspections in this industry (NAICS 333995)
More inspections in WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 336643382.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.