RANDOLPH, NJ —
OSHA Inspection: GENERAL WIRE & STAMPING INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of GENERAL WIRE & STAMPING INC. in 1 EMERY AVE., RANDOLPH, NJ 07869 (NAICS 332618). OSHA activity number 336665385.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- GENERAL WIRE & STAMPING INC.
- Site address
- 1 EMERY AVE.
- City
- RANDOLPH
- State
- NJ
- ZIP
- 07869
- Mailing
- 1 EMERY AVE., RANDOLPH, NJ 07869
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332618
- Employees
- 12
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.215 B09
- Issued
- Nov 16, 2012
- Abate by
- Dec 13, 2012
- Penalty
- Initial $1,600 · Current $1,200 Reduced
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: a) Tool room The grinder did not have a tongue guard on the top side of the grinder and keep to within 1/4 inches of the wheel. Violation was found on or about 10/03/2012.
Recent events (2)
- — I (S) $1200
- — Z (S) $1600
1910.212 B
- Issued
- Nov 16, 2012
- Abate by
- Dec 13, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.212(b): Machine(s) designed for fixed location(s) were not securely anchored to prevent walking or moving: a) Tool room The pedestal grinder was not permanently mounted on the ground. Violation was observed on or about 10/03/2012
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.217 C01 I
- Issued
- Nov 16, 2012
- Abate by
- Dec 13, 2012
- Penalty
- Initial $2,000 · Current $1,500 Reduced
General-duty citation text
29 CFR 1910.217(c)(1)(i): The employer did not provide and ensure the usage of point of operation guards or properly applied point of operation devices on every operation performed on mechanical power press(es) a) Production shop The Burderer Press, model BSTA 30, had no guard to prevent an operator from reaching into the point of operation. Violation was observed on or about 10/03/2012
Recent events (2)
- — I (S) $1500
- — Z (S) $2000
1910.303 B07 IV
- Issued
- Nov 16, 2012
- Abate by
- Nov 29, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.303(b)(7)(iv): There were damaged parts that could adversely affect safe operation or mechanical strength of the equipment, such as parts that were broken, bent, cut, or deteriorated by corrosion, chemical action, or overheating: a) Production shop The external insulation of cable of the wire feeder, Rapid-air model P1V Serial # 32454, was damaged. Violation was observed on or about 10/10/2012
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections in this industry (NAICS 332618)
More inspections in NJ
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 336665385.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.