OSHA Inspection: U.S. NAVY EXCHANGE MAINTENANCE

Issued

Oct 23, 2012

Abate by

Dec 6, 2012

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.36(d)(1): Employee(s) were not able to open an exit route door from the inside at all times without keys, tools, or special knowledge:    a) Electrician Room 29, where the designated exit door located across the hall was locked.

Issued

Oct 23, 2012

Abate by

Dec 6, 2012

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.37(b)(2):  Each exit was not clearly visible and marked by a sign reading "Exit":    a) At the facility, where the designated emergency exit doors not equipped with exit signs included:    1. Wood Shop  2. Break Room   3. Warehouse

Issued

Oct 23, 2012

Abate by

Dec 6, 2012

Penalty

Initial $0 · Current $0

General-duty citation text

1910.37(b)(4): Where the direction of travel to the exit or exit discharge was not immediately apparent, signs were not posted along the exit access indicating the direction of travel to the nearest exit and exit discharge:    a) Electrician Room 29, where directional signs were not posted along the exit access.

Issued

Oct 23, 2012

Abate by

Dec 6, 2012

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.37(b)(5): Each doorway or passage along an exit access that could be mistaken for an exit was not marked "Not an Exit" or similar designation, or be identified by a sign indicating its actual use (e.g., closet):    a) Warehouse, where doors located in the exit access route were not equipped with signage included:    1. Compressor room door  2. Single door located adjacent to shelving  3. Double doors located adjacent to shelving

Issued

Oct 23, 2012

Abate by

Dec 6, 2012

Penalty

Initial $0 · Current $0

General-duty citation text

29CFR 1910.213(b)(3):  On applications where injury to the operator might result if motors were to restart after power failures, provision was not made to prevent machines from automatically restarting upon restoration of power:    a) Carpenter Shop, where wood working machines not equipped with anti-restart devices included:    1. Heavy Duty Milwaukee 8 inch panel saw, #6480.  2. Rockwell finishing sander, #NX7054.  3. Delta drill press

Issued

Oct 23, 2012

Abate by

Dec 6, 2012

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.305(g)(1)(iv)(B): Flexible cords and cables were run through holes in walls, ceilings, or floors:    a) Carpenter Shop, where an extension cord was run through the ceiling and used to supply power to the Heavy Duty Milwaukee 8 inch panel saw, #6480.

Issued

Oct 23, 2012

Abate by

Dec 6, 2012

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.303(b)(2): Listed or labeled equipment was not installed and used in accordance with any instructions included in the listing or labeling:     a) Electrician Room 29, where a relocatable power tap was used to supply power to appliances including, the Quasar microwave oven and the Mr. Coffee drip coffee maker.    The U.S. Navy Exchange was previously cited for a violation of this standard which was contained in OSHA inspection no. 309093524, citation no. 1, item no. 1, issued on June 6, 2008 with respect to a workplace at Oak Harbor, WA.

Issued

Oct 23, 2012

Abate by

Dec 6, 2012

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.157(e)(2): Portable fire extinguishers were not visually inspected at least monthly:    a)  Maintenance Building 22, where employees would be expected to fight incipient stage fires, the Amerex fire extinguishers were not inspected on a monthly basis.

Issued

Oct 23, 2012

Abate by

Dec 6, 2012

Penalty

Initial $0 · Current $0

General-duty citation text

1910.303(g)(1)(ii): Working space for equipment likely to require examination, adjustment, servicing, or maintenance while energized was used for storage:    a) Warehouse, where the Jet Metal Cutting Band Saw was stored in front of circuit panel P5.