ELIZABETHTOWN, PA —
OSHA Inspection: LIBRANDI MACHINE SHOP, INCORPORATED
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of LIBRANDI MACHINE SHOP, INCORPORATED in 11 BLACK HAWK LANE, ELIZABETHTOWN, PA 17022 (NAICS 332710). OSHA activity number 336733183.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- LIBRANDI MACHINE SHOP, INCORPORATED
- Site address
- 11 BLACK HAWK LANE
- City
- ELIZABETHTOWN
- State
- PA
- ZIP
- 17022
- Mailing
- 93 AIRPORT DRIVE, MIDDLETOWN, PA 17057
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332710
- Employees
- 37
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.212 A01
- Issued
- Feb 15, 2013
- Abate by
- Mar 23, 2013
- Penalty
- Initial $3,600 · Current $2,700 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: (a) Brake Lever Area - The Belter Number One sander did not have the ingoing nip points guarded, on or about October 4, 2012. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- — I (S) $2700
- — Z (S) $3600
1910.219 D01
- Issued
- Feb 15, 2013
- Abate by
- Mar 23, 2013
- Penalty
- Initial $3,600 · Current $2,700 Reduced
General-duty citation text
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o): (a) Bumper Polishing Area - The pulleys on the swing grinder were not guarded, on or about October 24, 2012. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- — I (S) $2700
- — Z (S) $3600
1910.219 E01 I
- Issued
- Feb 15, 2013
- Abate by
- Mar 23, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(e)(1)(i): Where both runs of the horizontal belts were seven (7) feet or less from the floor level, the guard did not extend to at least fifteen (15) inches above the belt or to a standard height, except that where both runs of a horizontal belt were 42 inches or less from the floor, the belt was not fully enclosed in accordance with paragraphs (m) and (o) of this section: a) Bumper Polishing Area - The horizontal belts on the swing grinder were not guarded, on or about October 24, 2012. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.1200 H03
- Issued
- Feb 15, 2013
- Abate by
- Mar 23, 2013
- Penalty
- Initial $2,700 · Current $2,025 Reduced
General-duty citation text
29 CFR 1910.1200(h)(3): The employee training did not include all of the information contained in paragraphs 29 CFR 1910.1200(h)(3)(i) through 29 CFR 1910.1200(h)(3)(iv): (a) Librandi Machine Shop, Incorporated - The employer did not train employees on the physical hazards of the combustible carbon steel dust, and the appropriate work practices and emergency procedures to be followed when working with a combustible dust, on or about October 4, 2012. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- — I (S) $2025
- — Z (S) $2700
More inspections in this industry (NAICS 332710)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 336733183.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.