OSHA Inspection: LECTROMAT, INC.

Issued

2012-10-24 00:00:00

Abate by

2012-11-15 00:00:00

Penalty

Initial $1200.00 · Current $600.00 Reduced

General-duty citation text

29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o):     (a) Facility, Rope Rewind Station: On or before October 5, 2012, an employee was exposed to laceration and/or amputation hazards in that the rope rewind machine's top and bottom pulleys were unguarded.

Issued

2012-10-24 00:00:00

Abate by

2012-11-15 00:00:00

Penalty

Initial $1200.00 · Current $600.00 Reduced

General-duty citation text

29 CFR 1910.219(f)(3): Sprocket wheels and chains which were seven (7) feet or less above floors or platforms were not enclosed:    (a) Facility, Laminator #3: On or before October 5, 2012, an employee was exposed to laceration and/or amputation hazards in that the chain and sprockets were not guarded.     (b) Facility, Laminator #4: On or before October 5, 2012, an employee was exposed to laceration and/or amputation hazards in that the chain and sprockets were not guarded.     (c) Facility, Laminator #5: On or before October 5, 2012, an employee was exposed to laceration and/or amputation hazards in that the chain and sprockets were not guarded.

Issued

2012-10-24 00:00:00

Abate by

2012-11-15 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.147(c)(1): The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative:    (a) Facility, Laminators: On or before October 5, 2012, the employer did not develop a hazardous energy control program in order to protect employees against the unexpected startup of equipment such as the laminating machines during the cleaning and/or repairing process.