PATERSON, NJ —
OSHA Inspection: AMC GRANITE AND CABINETRY LLC
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of AMC GRANITE AND CABINETRY LLC in 61-65 EAST RAILWAY AVE, PATERSON, NJ 07503 (NAICS 238340). OSHA activity number 336795588.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- AMC GRANITE AND CABINETRY LLC
- Site address
- 61-65 EAST RAILWAY AVE
- City
- PATERSON
- State
- NJ
- ZIP
- 07503
- Mailing
- 61-65 EAST RAILWAY AVE, PATERSON, NJ 07503
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238340
- Employees
- 7
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.110 E04 III
- Issued
- Feb 4, 2013
- Penalty
- Initial $1,440 · Current $576 Reduced
General-duty citation text
29 CFR 1910.110(e)(4)(iii): Permanent and removable fuel containers were not securely mounted to prevent jarring loose, slipping, or rotating: a. 61-65 East Railray Ave: The index pin on a powered industrial truck was missing; thus allowing the cylinder to rotate during operation, on or about 10/09/2012.
Recent events (2)
- — I (S) $576
- — Z (S) $1440
1910.178 A04
- Issued
- Feb 4, 2013
- Abate by
- Mar 9, 2013
- Penalty
- Initial $1,800 · Current $720 Reduced
General-duty citation text
29 CFR 1910.178(a)(4): Modifications and additions which affect capacity and safe operation of powered industrial truck were performed by the employer without the manufacturer's prior written approval: a. 61-65 East Railway Ave: An employee was exposed to a struck by hazard while using a Vestil boom that was attached to a Hyster powered industrial truck without manufacturer's approval, on or about 10/09/2012.
Recent events (2)
- — I (S) $720
- — Z (S) $1800
1910.178 L01 I
- Issued
- Feb 4, 2013
- Penalty
- Initial $1,800 · Current $720 Reduced
General-duty citation text
29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator was competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l) a. 61-65 East Railway Ave: Employees exposed to struck by hazard while operating a Hyster powered industrial truck without being certified through training evaluation, on or about 10/09/2012.
Recent events (2)
- — I (S) $720
- — Z (S) $1800
1910.303 F02
- Issued
- Feb 4, 2013
- Penalty
- Initial $1,080 · Current $432 Reduced
General-duty citation text
29 CFR 1910.303(f)(2): Each service, feeder, and branch circuit, at its disconnecting means or overcurrent device, was not legibly marked to indicate its purpose, nor located and arranged so the purpose was evident: a. Edge Panel Room: The breakers on an electrical panel were not labeled to indicate their purpose, on or about 10/09/2012. b. Cutting Room: The breakers on an electrical panel was not labeled to indicate their purpose, on or about 10/09/2012.
Recent events (2)
- — I (S) $432
- — Z (S) $1080
More inspections in this industry (NAICS 238340)
More inspections in NJ
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 336795588.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.