BELOIT, WI —
OSHA Inspection: D.M. MANUFACTURING, INC.
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of D.M. MANUFACTURING, INC. in 2750 KENNEDY DRIVE, BELOIT, WI 53511 (NAICS 332313). OSHA activity number 336797394.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- D.M. MANUFACTURING, INC.
- Site address
- 2750 KENNEDY DRIVE
- City
- BELOIT
- State
- WI
- ZIP
- 53511
- Mailing
- 2750 KENNEDY DRIVE, BELOIT, WI 53511
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332313
- Employees
- 60
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.179 J02 III
- Issued
- Jan 31, 2013
- Abate by
- Apr 30, 2013
- Penalty
- Initial $4,200 · Current $2,100 Reduced
General-duty citation text
29 CFR 1910.179(j)(2)(iii): Monthly inspections of hooks, with a certification record which includes the date of inspection, the signature of the person who performed the inspection and the serial number, or other identifier, of the hook inspected, were not performed: At the time of the inspection, hooks on overhead cranes used for lifting up to 1000 lbs were not being inspected on a daily to monthly basis. Abatement certification required per 29 CFR 1903.19(c).
Recent events (2)
- — I (S) $2100
- — Z (S) $4200
1910.179 N04 I
- Issued
- Jan 31, 2013
- Abate by
- Feb 22, 2013
- Penalty
- Initial $4,200 · Current $0 Reduced
General-duty citation text
29 CFR 1910.179(n)(4)(i): The upper limit switch of each hoist was not tried out under no load, at the beginning of each operator's shift. Operators lifting structural steel did not try out the upper limit switch under no load of the hoists at the facility at the beginning of each shift. Abatement certification required per 29 CFR 1903.19(c).
Recent events (2)
- — I (S) $0
- — Z (S) $4200
1910.184 D
- Issued
- Jan 31, 2013
- Abate by
- Feb 22, 2013
- Penalty
- Initial $2,800 · Current $0 Reduced
General-duty citation text
29 CFR 1910.184(d): Each day before being used, the sling and all fastenings and attachments were not being inspected for damage or defects by a competent person designated by the employer. A competent person did not ensure that inspections of all slings was being done on a daily basis. Abatement certification required per 29 CFR 1903.19(c).
Recent events (2)
- — I (S) $0
- — Z (S) $2800
1910.184 I09 IV
- Issued
- Jan 31, 2013
- Abate by
- Apr 30, 2013
- Penalty
- Initial $0 · Current $1,400
General-duty citation text
29 CFR 1910.184(i)(9)(iv): Synthetic web sling(s) with broken or worn stitches were not immediately removed from service. A synthetic web sling was observed to be in an excessively worn condition with broken and worn stitches at the facility. Abatement certification required per 29 CFR 1903.19(c).
Recent events (2)
- — I (S) $1400
- — Z (S) $0
1910.184 E03 II
- Issued
- Jan 31, 2013
- Abate by
- Feb 20, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.184(e)(3)(ii): Records of the most recent month in which each alloy steel chain sling was thoroughly inspected were not available for examination: The employer did not maintain the most recent monthly records of the steel chain slings used at the facility. Abatement certification required per 29 CFR 1903.19(c).
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at D.M. Manufacturing, INC.
View D.M. Manufacturing, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332313)
More inspections in WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 336797394.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.