RAINBOW CITY, AL —
OSHA Inspection: D&L MOLDS, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of D&L MOLDS, INC. in 1100 DEARFOOT PARKWAY, RAINBOW CITY, AL 35906 (NAICS 333511). OSHA activity number 336805197.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- D&L MOLDS, INC.
- Site address
- 1100 DEARFOOT PARKWAY
- City
- RAINBOW CITY
- State
- AL
- ZIP
- 35906
- Mailing
- 1100 DEERFOOT PARKWAY, RAINBOW CITY, AL 35906
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 333511
- Employees
- 11
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.147 C01
- Issued
- Oct 17, 2012
- Abate by
- Dec 20, 2012
- Penalty
- Initial $2,800 · Current $1,400 Reduced
General-duty citation text
29 CFR 1910.147(c)(1): The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative: (a) On or about 10/11/12 - Main Shop, an energy control program had not been established for employees performing servicing and maintenance activities inside the HAAS CNC machines.
Recent events (2)
- — I (S) $1400
- — Z (S) $2800
1910.212 A01
- Issued
- Oct 17, 2012
- Abate by
- Oct 24, 2012
- Penalty
- Initial $2,800 · Current $1,400 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: (a) On or about 10/11/12 - Main Shop, a horizontal band saw did not have the unused portions of the blade guarded. (b) On or about 10/11/12 - Main Shop, a pedestal drill press did not have the chuck guarded.
Recent events (2)
- — I (S) $1400
- — Z (S) $2800
1910.215 B09
- Issued
- Oct 17, 2012
- Penalty
- Initial $1,600 · Current $800 Reduced
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one-fourth inch: (a) On or about 10/11/12 - Grinding Room, the tongue guards on the pedestal-mounted abrasive grinder were not adjusted to at least one-fourth inch.
Recent events (2)
- — I (S) $800
- — Z (S) $1600
1910.242 B
- Issued
- Oct 17, 2012
- Penalty
- Initial $1,600 · Current $800 Reduced
General-duty citation text
29 CFR 1910.242(b): Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i.: (a) On or about 10/11/12 - Main Shop, compressed air was used with an output of 100 p.s.i. to clean off parts.
Recent events (2)
- — I (S) $800
- — Z (S) $1600
1910.1200 E01
- Issued
- Oct 17, 2012
- Abate by
- Dec 20, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met: (a) On or about 10/11/12 - Main Shop, a written hazard communication program had not been developed and implemented for employees who were exposed to hazardous chemicals including, but not limited to, acetone and propane.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections in this industry (NAICS 333511)
More inspections in AL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 336805197.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.