Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: GREAT LAKES PRECISION TUBE, INC.

Planned inspection · Health discipline

On , OSHA opened a planned health inspection of GREAT LAKES PRECISION TUBE, INC. in 237 S. HIGHLAND AVE., AURORA, IL 60506 (NAICS 331210). OSHA activity number 336818190.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Great Lakes Precision Tube, INC. — free Get an email when a new federal OSHA severe-injury report for Great Lakes Precision Tube, INC. is published. One employer, no account, unsubscribe in one click.
Site address
237 S. HIGHLAND AVE.
City
AURORA
State
IL
ZIP
60506
Mailing
237 S. HIGHLAND AVE., AURORA, IL 60506
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
331210
Employees
30
Ownership type
A

4 citations on file for this inspection.

1910.95 C01

Serious Gravity 10 1 instance 1 exposed
Issued
Jan 29, 2013
Abate by
Mar 18, 2013
Penalty
Initial $4,900 · Current $2,450 Reduced

Hazardous substances 8111

29 CFR 1910.95(c)(1):   The employer did not administer a continuing, effective hearing conservation program as described in 29 CFR 1910.9(c) through (o) whenever employee noise exposures equal or exceed an 8-hour time-weighted average sound level of 85 decibels measured on the A scale, or equivalently a dose of fifty percent:    Facility:   (a). The operator at the center checker at the Mill Cut Off machine was exposed to noise at 85.6% of the permissible daily exposure (8-hour time weighted average of 80 dBA) or the equivalent sound level of approximately 88.9 dBA during a 478 minutes sampling period on 11/19/12: exposure calculation includes a zero increment for the 2 minutes not sampled.      The employer did not implement a Hearing Conservation Program.     Abatement documentation is required for this item in accordance with the requirements of 29 CFR 1903.19(d).
Recent events (2)
  • — I (S) $2450
  • — Z (S) $4900

1910.212 A01

Serious Gravity 5 1 instance 1 exposed
Issued
Jan 29, 2013
Penalty
Initial $3,500 · Current $1,750 Reduced
29 CFR 1910.212(a)(1):   One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:    Facility: The Haven Cutting Saw point of operation was not guarded.    No documentation or certification is required for this item.
Recent events (2)
  • — I (S) $1750
  • — Z (S) $3500

1910.1200 E01

Serious Gravity 1 1 instance 2 exposed
Issued
Jan 29, 2013
Abate by
Mar 18, 2013
Penalty
Initial $2,100 · Current $800 Reduced
29 CFR 1910.1200(e)(1):   The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met:    Facility: The employer did not develop and implement a hazard communication program.    Abatement documentation is required for this item in accordance with the requirements of 29 CFR 1903.19(d).
Recent events (2)
  • — I (S) $800
  • — Z (S) $2100

1910.1200 H01

Serious Gravity 1 1 instance 1 exposed
Issued
Jan 29, 2013
Abate by
Mar 18, 2013
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(h)(1):   The employer did not provide employees with effective information and training on hazardous chemicals in their work area at the time of their initial assignment, and whenever a new physical or health hazard the employees had not previously been trained about was introduced into their work area.    Facility: The employees have not been trained on the safety and health hazards of chemicals such as, but not limited to corrosion inhibitor, coolant, and blade lubricant.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 336818190.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.