AUSTINTOWN, OH —
OSHA Inspection: LENCYK MASONRY
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of LENCYK MASONRY in 255 IDAHO RD. 215 IDAHO RD., AUSTINTOWN, OH 44515 (NAICS 238140). OSHA activity number 336823984.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- LENCYK MASONRY
- Site address
- 255 IDAHO RD. 215 IDAHO RD.
- City
- AUSTINTOWN
- State
- OH
- ZIP
- 44515
- Mailing
- 7671 SOUTH AVENUE, YOUNGSTOWN, OH 44512
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238140
- Employees
- 30
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.21 B02
- Issued
- Dec 3, 2012
- Abate by
- Jan 5, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(c): The employer did not develop and implement a written respiratory protection program with required worksite-specific procedures and elements for required respirator use: The employer did not have a written respiratory protection program and employees were required to wear tight-fitting half-face respirators when cutting/split-facing cement blocks and masonry bricks during bricklaying activities.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.134 E01
- Issued
- Dec 3, 2012
- Abate by
- Jan 5, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(e)(1): The employer shall provide a medical evaluation to determine the employee's ability to use a respirator, before the employee is fit tested or required to use the respirator in the workplace. The employer may discontinue an employee's medical evaluations when the employee is no longer required to use a respirator. The employer did not provide medical evaluations for employees required to wear tight-fitting half-face respirators when cutting and/or split-facing cement blocks or masonry bricks.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.134 F01
- Issued
- Dec 3, 2012
- Abate by
- Dec 20, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(f)(1): The employer did not ensure that employee(s) required to use a tight-fitting facepiece respirator passed the appropriate qualitative fit test (QLFT) or quantitative fit test (QNFT): The employer did not provide fit test for employees required to wear tight-fitting half-face respirators when cutting and/or split- facing cement blocks or masonry bricks, during the construction of two Elementary Schools.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.134 K06
- Issued
- Dec 3, 2012
- Abate by
- Dec 20, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(k): The employer did not provide comprehensive, understandable training which did not occur annually and/or more often if necessary:(Construction Reference 1926.103): On 10/03/2012 the employer did not provide respiratory protection training to employees required to wear tight-fitting half-face respirators when cutting and/or split-facing cement blocks or masonry bricks.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1926.100 B
- Issued
- Dec 3, 2012
- Abate by
- Dec 13, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.100(b): Helmets for the protection of employees against impact and penetration of falling and flying objects did not meet the specifications contained in American National Standards Institute(ANSI)1969: On 10/03/2012 an employee performing bricklaying activities was observed wearing a damaged hardhat. Damage to hardhat was approximately six (6), 1 inch in diameter holes drilled in the top of the hat.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Lencyk Masonry
View Lencyk Masonry's full OSHA safety record →
More inspections in this industry (NAICS 238140)
More inspections in OH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 336823984.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.