Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: COLORADO RESCON

Complaint inspection · Health discipline

On , OSHA opened a complaint health inspection of COLORADO RESCON in 43 N. SILICON DRIVE, PUEBLO WEST, CO 81007 (NAICS 236118). OSHA activity number 336918396.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Colorado Rescon — free Get an email when a new federal OSHA severe-injury report for Colorado Rescon is published. One employer, no account, unsubscribe in one click.
Establishment
COLORADO RESCON
Site address
43 N. SILICON DRIVE
City
PUEBLO WEST
State
CO
ZIP
81007
Mailing
43 N. SILICON DRIVE, PUEBLO WEST, CO 81007
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
236118
Employees
14
Ownership type
A

5 citations on file for this inspection.

1910.134 D01 I

Serious Gravity 5 1 instance 1 exposed
Issued
Nov 21, 2012
Abate by
Dec 6, 2012
Penalty
Initial $2,000 · Current $2,000
29 CFR 1910.134(d)(1)(i): The employer did not select and provide an appropriate respirator based on the respiratory hazard(s) to which the worker is exposed and workplace and user factors that affect respirator performance and reliability:    a) On or about October 17, 2012 and time prior, employees were exposed to illnesses in that, the employees were required to wear tight fitting respirators that did not provide protection against the product they were applying.    Abatement Note:  Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (2)
  • — I (S) $2000
  • — Z (S) $2000

1910.134 F02

Serious Gravity 5 1 instance 1 exposed
Issued
Nov 21, 2012
Abate by
Dec 6, 2012
Penalty
Initial $0 · Current $0
29 CFR 1910.134(f)(2): The employer did not ensure that an employee using a tight-fitting facepiece respirator is fit tested prior to initial use of the respirator, whenever a different respirator facepiece (size, style, model or make) is used, and at least annually thereafter:    a) On or about October 17, 2012 and time prior, employees were exposed to illnesses in that, the employees were required to wear tight fitting respirators prior to being annually fit tested.        Abatement Note:  Fit testing shall follow the requirements listed in 29 CFR 1910.134(f).      Abatement Note:  Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.134 K05 II

Serious Gravity 5 1 instance 1 exposed
Issued
Nov 21, 2012
Abate by
Dec 6, 2012
Penalty
Initial $0 · Current $0
29 CFR 1910.134(k)(5)(iii): Employees were not retrained when inadequacies in the employee's knowledge or use of the respirator indicated that the employee has not retained the requisite understanding or skill:    a) On or about October 17, 2012 and time prior, employees required to wear respirators were not adequately trained in the required elements of the standard.    Abatement Note:  Respirator training shall include information covered in 29 CFR 1910.134(K)(1)(i)-(vii).  Training shall be conducted on an annual basis and prior to the employee wearing the respirator.     Abatement Note:  Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.146 C01

Deleted Serious Gravity 5 1 instance 1 exposed
Issued
Nov 21, 2012
Abate by
Dec 6, 2012
Penalty
Initial $2,000 · Current $0 Reduced
29 CFR 1910.146(c)(1): The employer did not evaluate the workplace to determine if any spaces are permit-required confined spaces. NOTE: Proper application of the decision flow chart in Appendix A to section 1910.146 would facilitate compliance with this requirement:    a) On or about October 17, 2012 and time prior, employees were exposed to injury in that, confined spaces such as crawl spaces were not assessed to determine if a confined space enter permit was required prior to entering the confined space.    Abatement Note:  Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (2)
  • — I (S) $0
  • — Z (S) $2000

1910.146 G01

Deleted Serious Gravity 5 1 instance 1 exposed
Issued
Nov 21, 2012
Abate by
Dec 6, 2012
Penalty
Initial $0 · Current $0
29 CFR 1910.146(g)(1):  The employer did not provide training so that all employees whose work is regulated by this section acquire the understanding, knowledge, and skills necessary for the safe performance of the duties assigned under this section:    a) On or about October 17, 2012 and time prior, employees were exposed to injury in that, the employees were required to enter permit-required confined spaces and did not understand the hazards associated when performing their assigned duties.    Abatement Note:  Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 336918396.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.