IDAHO FALLS, ID —
OSHA Inspection: M-L MASONRY, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of M-L MASONRY, INC. in 2853 NORTH LUCINA AVE, IDAHO FALLS, ID 83401 (NAICS 238140). OSHA activity number 336934583.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- M-L MASONRY, INC.
- Site address
- 2853 NORTH LUCINA AVE
- City
- IDAHO FALLS
- State
- ID
- ZIP
- 83401
- Mailing
- 12604 NORTH 25 EAST, IDAHO FALLS, ID 83401
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238140
- Employees
- 19
- Ownership type
- A
Citations
4 citations on file for this inspection.
1926.451 G01
- Issued
- Nov 14, 2012
- Abate by
- Nov 20, 2012
- Penalty
- Initial $3,500 · Current $2,100 Reduced
General-duty citation text
29 CFR 1926.451(g)(1): Each employee on a scaffold more than 10 feet (3.1 m) above a lower level was not protected from falling to that lower level: a) North side of structure: On October 18, 2012 employees stacked concrete blocks onto a scaffold platform without a fall protection system in place. b) North side of structure: On October 18, 2012 employees performed masonry activities on a non-stop scaffold system without an end guardrail panel in place. c) South side of structure: On October 18, 2012 employees performed masonry activities on a non-stop scaffold system without a guardrail system in place. Note) Abatement certification IS required for this item.
Recent events (2)
- — I (S) $2100
- — Z (S) $3500
1926.451 H02 II
- Issued
- Nov 14, 2012
- Abate by
- Nov 20, 2012
- Penalty
- Initial $2,100 · Current $1,500 Reduced
General-duty citation text
29 CFR 1926.451(h)(2)(ii): Where there was a danger of tools, materials, or equipment falling from a scaffold and striking employees below, a toeboard was not erected along the edge of platforms more than 10 feet (3.1 m) above lower levels for a distance sufficient to protect employees below: a) South end of structure: On October 18, 2012 a toe board was not in place on the working level of the non-stop scaffold system, nor was the area below barricaded to keep employees away. Note) Abatement certification IS required for this item.
Recent events (2)
- — I (S) $1500
- — Z (S) $2100
1904.40 A
- Issued
- Nov 14, 2012
- Abate by
- Nov 20, 2012
- Penalty
- Initial $700 · Current $0 Reduced
General-duty citation text
29 CFR 1904.40(a): Records kept under Part 1904 were not provided within four (4) business hours when requested by an authorized agency: a) An OSHA Form 300, Log of Work-Related Injuries and Illnesses, and an OSHA 300A, Summary of Work Related Injuries and Illnesses for calendar years 2009, 2010, 2011, and 2012 to date were not provided as requested. Note) Abatement certification IS required for this item.
Recent events (2)
- — I (O) $0
- — Z (O) $700
1910.1200 H03 III
- Issued
- Nov 14, 2012
- Abate by
- Nov 20, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(h)(3)(iii): Employee training did not include the measures employees can take to protect themselves from hazards, including specific procedures the employer has implemented to protect employees from exposure to hazardous chemicals, such as appropriate work practices, emergency procedures, and personal protective equipment to be used: a) North end of structure: On October 18, 2012 employees standing near masonry block dry cutting activities, did not recognize or acknowledge the potential health hazard of standing in the dust cloud produced by the cutting activity, nor did they take action to minimize their exposure to the hazard. b) North end of structure: On October 18, 2012 an employee performing masonry block dry cutting activities did not recognize or acknowledge the potential health hazard of performing this activity, nor did the employee take action to minimize exposure to the hazard. Note) Abatement certification IS required for this item.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at M-L Masonry, INC.
View M-L Masonry, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 238140)
More inspections in ID
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 336934583.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.