LEOLA, AR —
OSHA Inspection: H.G. TOLER AND SON LUMBER COMPANY, INC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of H.G. TOLER AND SON LUMBER COMPANY, INC in 10468 HWY 229 S, LEOLA, AR 72084 (NAICS 321113). OSHA activity number 336940382.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- H.G. TOLER AND SON LUMBER COMPANY, INC
- Site address
- 10468 HWY 229 S
- City
- LEOLA
- State
- AR
- ZIP
- 72084
- Mailing
- 10468 HWY 229 S, LEOLA, AR 72084
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321113
- Employees
- 66
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.147 C04 II
- Issued
- Jan 30, 2013
- Abate by
- Mar 15, 2013
- Penalty
- Initial $4,900 · Current $4,900
General-duty citation text
29 CFR 1910.147(c)(4)(ii): Procedures did not clearly and specifically outline the scope, purpose, authorization, rules, and techniques to be utilized for the control of hazardous energy, and the means to enforce compliance including, but not limited to, 29 CFR 1910.147(c)(4)(ii)(A), (c)(4)(ii)(B), (c)(4)(ii)(C) and (c)(4)(ii)(D)(h): On or about October 11, 2012, at the H. G. Toler and Son Lumber Company in Leola, Arkansas, the employer did not develop energy control procedures that specifically outlined the scope, purpose, authorization, rules and techniques to be used for the control of hazardous energy exposing employees to the hazard of being caught in the machines due to accidental start up.
Recent events (1)
- — Z (S) $4900
1910.147 D04 I
- Issued
- Jan 30, 2013
- Abate by
- Feb 7, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(d)(4)(i): Lockout or tagout devices were not affixed to each energy isolating device by authorized employees: On or about October 11, 2012, and at times prior thereto, at the H. G. Toler and Son lumber mill in Leola, Arkansas, the employer did not ensure lock out devices were affixed to each energy isolating device exposing employees to the hazard of being caught in the machines.
Recent events (1)
- — Z (S) $0
1910.212 A01
- Issued
- Jan 30, 2013
- Abate by
- Feb 14, 2013
- Penalty
- Initial $4,900 · Current $4,900
General-duty citation text
29 CFR 1910.212(a)(1): Machine guarding was not provided to protect operator(s) and other employees from hazard(s) created by: ingoing nip points, rotating parts, and/or flying chips or sparks: On or about October 11, 2012, at the H. G. Toler and Son Lumber Company in Leola, Arkansas, the employer did not provide machine guarding and exposed employees to caught in and struck by hazards in the following locations: a) The metal work lathe in the maintenance shop. b) The resaw return conveyor.
Recent events (1)
- — Z (S) $4900
1910.219 D01
- Issued
- Jan 30, 2013
- Abate by
- Feb 14, 2013
- Penalty
- Initial $4,900 · Current $4,900
General-duty citation text
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o): On or about October 11, 2012, at the H. G. Toler and Son lumber mill in Leola, Arkansas, the employer did not provide machine guarding over belts and pulleys that were less than 7 feet above the floor exposing employees to the hazard of being caught in the pulleys in the following locations: a) The log haul area of the mill. b) The band mill drive motor.
Recent events (1)
- — Z (S) $4900
1910.219 F01
- Issued
- Jan 30, 2013
- Abate by
- Mar 15, 2013
- Penalty
- Initial $4,900 · Current $4,900
General-duty citation text
29 CFR 1910.219(f)(1): Gear(s) were not guarded by a complete enclosure or by one of the methods specified in 29 CFR 1910.219(f)(1)(ii) and (f)(1)(iii): On or about October 11, 2012, at the H. G. Toler and Son Lumber Company in Leola, Arkansas, the employer did not provide machine guarding over chains and sprockets exposing employees to the hazard of being caught in the sprockets in the following: a) The log haul area of the mill. b) The unscrambler. c) The separator. d) The trimmer vs loader. e) The trimmer out feed. f) The mill waste conveyor. g) The chipper chain. h) The chipper chain drive motor. i) The hog out feed drive motor.
Recent events (1)
- — Z (S) $4900
More inspections at H.G. Toler and SON Lumber Company, INC
View H.G. Toler and SON Lumber Company, INC's full OSHA safety record →
More inspections in this industry (NAICS 321113)
More inspections in AR
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 336940382.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.