Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: REY AND DANNY CONSTRUCTION, LLC

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of REY AND DANNY CONSTRUCTION, LLC in 12482 GLENGATE DRIVE, MARYLAND HEIGHTS, MO 63043 (NAICS 238160). OSHA activity number 336945183.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch REY and Danny Construction, LLC — free Get an email when a new federal OSHA severe-injury report for REY and Danny Construction, LLC is published. One employer, no account, unsubscribe in one click.
Site address
12482 GLENGATE DRIVE
City
MARYLAND HEIGHTS
State
MO
ZIP
63043
Mailing
5003 S. 37TH STREET, SAINT LOUIS, MO 63116
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238160
Employees
6
Ownership type
A

4 citations on file for this inspection.

1926.501 B04 I

Serious Gravity 10 1 instance 1 exposed
Issued
Oct 30, 2012
Abate by
Nov 21, 2012
Penalty
Initial $2,800 · Current $840 Reduced
29 CFR 1926.501(b)(4)(i): Each employee on walking/working surfaces shall be protected from falling through holes (including skylights) more than 6 feet (1.8 m) above lower levels, by personal fall arrest systems, covers, or guardrail systems erected around such holes:      JOB SITE: 12482 Glengate Drive, Maryland Heights, MO 63043, at this work site, a worker was observed on top of a 6:12 pitch roof, actively installing black felt paper around an open hole which was not protected from falling through the hole by personal fall arrest systems, covers, or guardrail systems erected around such hole.  The worker was exposed to a fall hazard.
Recent events (2)
  • — I (S) $840
  • — Z (S) $2800

1926.501 B13

Serious Gravity 10 1 instance 3 exposed
Issued
Oct 30, 2012
Abate by
Nov 21, 2012
Penalty
Initial $2,800 · Current $0 Reduced
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b):       JOB SITE: 12482 Glengate Drive, Maryland Heights, MO 63043, at this work site, workers were observed on top of a 6:12 pitch roofing, approximately 13 feet 3 inches eave to ground level, actively installing black felt paper, and were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measures.  The workers were exposed to a fall hazard.
Recent events (2)
  • — I (S) $0
  • — Z (S) $2800

1926.1053 B01

Serious Gravity 10 2 instances 3 exposed
Issued
Oct 30, 2012
Abate by
Nov 21, 2012
Penalty
Initial $2,800 · Current $0 Reduced
29 CFR 1926.1053(b)(1): Where (a) portable ladder(s) was/were used for access to an upper level landing surface and the ladder's length did not allow the ladder side rails to extend at least 3 feet (0.9 m) above the upper landing surface being accessed, the ladder was not secured at its top to a rigied support that will not deflect, and/or a grasping device was not provided to assist employees in mounting and dismounting the ladder:      JOB SITE: 12482 Glengate Drive, Maryland Heights, MO 63043, at this work site, a Louisville aluminum extension ladder, Model: D2222-24, was taken apart and used on two separate areas to gain access onto the roof and ladder's length did not allow the ladder side rails to extend at least 3 feet (0.9 m) above the upper landing surface being accessed, the ladder was not secured at its top to a rigid support that will not deflect, and/or a grasping device was not provided to assist employees in mounting and dismounting the ladder.  The workers were exposed to a fall hazard.
Recent events (2)
  • — I (S) $0
  • — Z (S) $2800

1926.1053 B16

Serious Gravity 10 1 instance 1 exposed
Issued
Oct 30, 2012
Abate by
Nov 21, 2012
Penalty
Initial $0 · Current $0
29 CFR 1926.1053(b)(16): Portable ladder(s) with structural defects, such as, but not limited to, broken or missing rungs, cleats, or steps, broken or split rails, corroded components, or other faulty or defective components:      JOB SITE: 12482 Glengate Drive, Maryland Heights, MO 63043, at this work site, a Louisville aluminum extension ladder, Model: D2222-24, was used to gain access onto the roof, approximately 13 feet 3 inches, was structurally defective with the left foot of the ladder bent approximately 45 degrees inward and with a bend rung.  The workers were exposed to a fall hazard.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 336945183.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.