WASHINGTON, PA —
OSHA Inspection: LAGONDA MACHINE INC.
Unprogrammed Other inspection · Safety discipline
At a glance
On , OSHA opened an unprogrammed Other safety inspection of LAGONDA MACHINE INC. in 2410 PARK AVENUE, WASHINGTON, PA 15301 (NAICS 332710). OSHA activity number 336971601.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- LAGONDA MACHINE INC.
- Site address
- 2410 PARK AVENUE
- City
- WASHINGTON
- State
- PA
- ZIP
- 15301
- Mailing
- 2410 PARK AVENUE, WASHINGTON, PA 15301
What kind of inspection was it?
- Inspection type
- Unprogrammed Other (I)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332710
- Employees
- 27
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.147 C04 I
- Issued
- Nov 16, 2012
- Abate by
- Jan 9, 2013
- Penalty
- Initial $2,100 · Current $1,475 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: (a) Facility- 2410 Park Avenue, Washington, PA: On or about October 19, 2012 the employer did not develop specific energy control procedures for each piece of equipment that has the ability to be locked out.
Recent events (2)
- — I (S) $1475
- — Z (S) $2100
1910.147 C06 I
- Issued
- Nov 16, 2012
- Abate by
- Jan 9, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed: Facility- 2410 Park Avenue, Washington, PA: On or about October 19, 2012 the employer did not conduct and annual review of the energy control program.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.147 C07 I A
- Issued
- Nov 16, 2012
- Abate by
- Jan 9, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(7)(i)(A): Authorized employee(s) did not receive training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolation: (a) Facility- 2410 Park Avenue, Washington, PA: On or about October 19, 2012 employees authorized to lock out were not trained specially on the type or magnitude of the hazardous energy they are locking out.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.212 A01
- Issued
- Nov 16, 2012
- Abate by
- Dec 6, 2012
- Penalty
- Initial $3,500 · Current $2,450 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: (a) Facility- 2410 Park Avenue, Washington, PA: On or about October 19, 2012 guards were not provided over rotating parts on the Sigma Lathe. Employees were exposed to rotating parts from the chuck during production.
Recent events (2)
- — I (S) $2450
- — Z (S) $3500
1910.242 B
- Issued
- Nov 16, 2012
- Abate by
- Dec 6, 2012
- Penalty
- Initial $2,100 · Current $1,475 Reduced
General-duty citation text
29 CFR 1910.242(b): Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i.: (a) Facility- 2410 Park Avenue, Washington, PA: On or about October 19, 2012 employees were observed using compressed air rated at 120 p.s.i. for cleaning purposes.
Recent events (2)
- — I (S) $1475
- — Z (S) $2100
More inspections at Lagonda Machine INC.
View Lagonda Machine INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332710)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 336971601.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.