NEW YORK, NY —
OSHA Inspection: MASONRY SERVICES, INC
Unprogrammed Related inspection · Safety discipline
At a glance
On , OSHA opened an unprogrammed Related safety inspection of MASONRY SERVICES, INC in 45 E. 33RD ST, NEW YORK, NY 10016 (NAICS 238140). OSHA activity number 336974993.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MASONRY SERVICES, INC
- Site address
- 45 E. 33RD ST
- City
- NEW YORK
- State
- NY
- ZIP
- 10016
- Mailing
- 201 SNEIDEKER AVE, BROOKLYN, NY 11207
What kind of inspection was it?
- Inspection type
- Unprogrammed Related (G)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238140
- Employees
- 1
- Ownership type
- A
Citations
4 citations on file for this inspection.
1926.1412 C01
- Issued
- Apr 1, 2013
- Abate by
- Apr 11, 2013
- Penalty
- Initial $5,390 · Current $2,695 Reduced
General-duty citation text
29 CFR 1926.1412(c)(1): Upon completion of assembly, the equipment must be inspected by a qualified person to assure that it is configured in accordance with manufacturer equipment criteria. Location: 45 E. 33rd St., New York, NY. a) The employer did not pre-plan crane operations nor inspected the truck-crane (NY License Plate # 53263-JT) to ensure that it was set up and/or configured in accordance with the manufacturer equipment criteria. The crane's stability outriggers were not fully extended as required and the hook's latch was loose; on or about 10/15/12.
Recent events (2)
- — I (S) $2695
- — Z (S) $5390
1926.1416 E05 I
- Issued
- Apr 1, 2013
- Abate by
- Apr 11, 2013
- Penalty
- Initial $3,850 · Current $1,925 Reduced
General-duty citation text
29 CFR 1926.1416(e)(5)(i): Outrigger/stabilizer position (horizontal beam extension) sensor/monitor if the equipment has outriggers or stabilizers. Temporary alternative measures: The operator must verify that the position of the outriggers or stabilizers is correct (in accordance with manufacturer procedures) before beginning operations requiring outrigger or stabilizer deployment. Location: 45 E. 33rd St., New York, NY. a) Employer operated a truck-crane (NY License Plate # 53263-JT) that did not have the stability outriggers fully extended as required by the manufacturer. Hazard observed on or about 10/15/12.
Recent events (2)
- — I (S) $1925
- — Z (S) $3850
1926.1417 A
- Issued
- Apr 1, 2013
- Abate by
- Apr 11, 2013
- Penalty
- Initial $4,620 · Current $2,310 Reduced
General-duty citation text
29 CFR 1926.1417(a): The employer must comply with all manufacturer procedures applicable to the operational functions of equipment, including its use with attachments. Location: 45 E. 33rd St., New York, NY. a) The truck-crane's (NY License Plate # 53263-JT) outriggers were not extended and the crane was not operated within the limits of the equipment's charts as required by the crane manufacturer. Employees were exposed to crane tip-over hazard. The hazards were observed on or about 10/15/12.
Recent events (2)
- — I (S) $2310
- — Z (S) $4620
1926.1430 G02
- Issued
- Apr 1, 2013
- Abate by
- Apr 11, 2013
- Penalty
- Initial $3,080 · Current $1,540 Reduced
General-duty citation text
29 CFR 1926.1430(g)(2): The employer must provide refresher training in relevant topics for each employee when, based on the conduct of the employee or an evaluation of the employee's knowledge, there is an indication that retraining is necessary. Location: 45 E. 33rd St., New York, NY. a) The employer operated a truck crane (NY License Plate # 53263-JT) that did not have its stability outriggers fully extended as required, the hook's latch was loose and a load chart was not utilized. Refresher training for employees is required; on or about 10/15/12.
Recent events (2)
- — I (S) $1540
- — Z (S) $3080
More inspections at Masonry Services, INC
View Masonry Services, INC's full OSHA safety record →
More inspections in this industry (NAICS 238140)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 336974993.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.