OKLAHOMA CITY, OK —
OSHA Inspection: ESTEY CABINET DOOR CO.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of ESTEY CABINET DOOR CO. in 9100 N.E. 40TH ST., OKLAHOMA CITY, OK 73184 (NAICS 337110). OSHA activity number 336979786.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ESTEY CABINET DOOR CO.
- Site address
- 9100 N.E. 40TH ST.
- City
- OKLAHOMA CITY
- State
- OK
- ZIP
- 73184
- Mailing
- P.O. BOX 30077, OKLAHOMA CITY, OK 73140
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 337110
- Employees
- 15
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.147 C01
- Issued
- Mar 6, 2013
- Abate by
- Mar 21, 2013
- Penalty
- Initial $1,600 · Current $960 Reduced
General-duty citation text
29 CFR 1910.147(c)(1): The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative: On or about October 15, 2013, and times prior thereto, the employer did not establish an energy control program that consisted of procedures, training and periodic inspections for employees who perform minor maintenance and change saw blades on woodworking machines. Employees were exposed to the hazard of being caught in the point of operation.
Recent events (2)
- — I (S) $960
- — Z (S) $1600
1910.212 A01
- Issued
- Mar 6, 2013
- Abate by
- Mar 14, 2013
- Penalty
- Initial $1,600 · Current $960 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: On or about October 15, 2012, and times prior thereto, the plexi-glass was missing from the interlocking doors on the Millennium IIDA MC-251/6 feed through moulder. Employees were exposed to the hazard of being caught in the point of operation and/or rotating parts.
Recent events (2)
- — I (S) $960
- — Z (S) $1600
1910.242 B
- Issued
- Mar 6, 2013
- Abate by
- Mar 12, 2013
- Penalty
- Initial $1,200 · Current $720 Reduced
General-duty citation text
29 CFR 1910.242(b): Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i. Effective chip guarding and personal protective equipment was not used when compressed air was used for cleaning purposes: On or about October 15, 2012 and times prior thereto, employees use compressed air above 30 p.s.i. for cleaning themselves and equipment. Employees were exposed to the hazard of being struck debris.
Recent events (2)
- — I (S) $720
- — Z (S) $1200
1910.303 B02
- Issued
- Mar 6, 2013
- Abate by
- Mar 12, 2013
- Penalty
- Initial $1,200 · Current $720 Reduced
General-duty citation text
29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling: On or about October 15, 2012, and times prior thereto, East Bay, metal electrical box with knockouts was not installed in accordance with listing and labeling. Employees were exposed to the hazard of electric shock.
Recent events (2)
- — I (S) $720
- — Z (S) $1200
1910.305 B01 II
- Issued
- Mar 6, 2013
- Abate by
- Mar 12, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(b)(1)(ii): Unused openings in boxes, cabinets, or fittings were not effectively closed: On or about October 15, 2012, and times prior thereto, East Bay, unused openings in metal electrical boxes were not effectively closed. Employees were exposed to the hazard of electric shock and/or the hazards associated with fire.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.305 B02 I
- Issued
- Mar 6, 2013
- Abate by
- Mar 12, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(b)(2)(i): Pull boxes, junction boxes, and fittings were not provided with covers approved for the purpose: On or about October 15, 2012, and times prior thereto, East Bay, electrical boxes were not provided with covers. Employees were exposed to the hazard of electric shock and/or the hazards associated with fire.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.37 B02
- Issued
- Mar 6, 2013
- Abate by
- Mar 21, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.37(b)(2): Each exit was not clearly visible and marked by a sign reading "Exit": On or about October 15, 2012, and times prior thereto, the following exit doors were not clearly marked with "Exit" signs. Employees were exposed to the hazards associated with fire. a) Exit door on the southwest side of the East Bay b) Exit door on the north side of the East Bay c) Exit door on the north side of the West Bay
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections in this industry (NAICS 337110)
More inspections in OK
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 336979786.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.