FARGO, ND —
OSHA Inspection: SOLID COMFORT, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of SOLID COMFORT, INC. in 3931 37TH AVENUE SW, FARGO, ND 58104 (NAICS 337127). OSHA activity number 336989785.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SOLID COMFORT, INC.
- Site address
- 3931 37TH AVENUE SW
- City
- FARGO
- State
- ND
- ZIP
- 58104
- Mailing
- 3931 37TH AVENUE SOUTH, FARGO, ND 58104
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 337127
- Employees
- 125
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.212 A01
- Issued
- Dec 13, 2012
- Abate by
- Feb 15, 2013
- Penalty
- Initial $6,300 · Current $4,095 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point-of-operation, ingoing nip points, rotating parts, flying chips and sparks: (a) For employees exposed to struck-by hazards while the VR120 KOMO TT Mach III CNC machine table is in operation at 3931 37th Avenue SW, Fargo, North Dakota. (b) For employees exposed to struck-by hazards while entering the gate on the backside of the VR120 KOMO TT Mach III CNC machine at 3931 37th Avenue SW, Fargo, North Dakota. (c) For employees exposed to struck-by hazards where wood parts became projectiles off the end of the optimizer sorting belt at 3931 37th Avenue SW, Fargo, North Dakota. (d) For employees exposed to burn hazards while inserting wood parts into the wood edge bander and homage tape bander at 3931 37th Avenue SW, Fargo, North Dakota.
Recent events (2)
- — I (S) $4095
- — Z (S) $6300
1910.212 A03 II
- Issued
- Dec 13, 2012
- Abate by
- Feb 15, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.212(a)(3)(ii): The point-of-operation of machines whose operation exposed an employee to injury was not guarded: (a) For employees exposed to caught-in and/or laceration hazards while inserting wood parts into the wood edge bander and tape head bander at 3931 37th Avenue SW, Fargo, North Dakota. (b) For employees exposed to struck-by hazards while operating the vertical milling machine in the maintenance shop at 3931 37th Avenue SW, Fargo, North Dakota.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.213 N03
- Issued
- Dec 13, 2012
- Abate by
- Feb 15, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(n)(3): Suitable guards were not provided to prevent the hands of the operator from coming in contact with the in-running rolls of feed rolls: (a) For employees exposed to caught-in and/or amputation hazards while inserting wood parts into the Molder Superset 23 at 3931 37th Avenue SW, Fargo, North Dakota.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.219 C02 I
- Issued
- Dec 13, 2012
- Abate by
- Feb 15, 2013
- Penalty
- Initial $4,500 · Current $2,925 Reduced
General-duty citation text
29 CFR 1910.219(c)(2)(i): All exposed part(s) of horizontal shafting seven (7) feet or less from floor or working platform were not protected by stationary casing(s) enclosing shafting completely or by trough(s) enclosing sides and top or sides and bottom of shafting: (a) For employees exposed to caught-in hazards while operating the rip line in-feed conveyor at 3931 37th Avenue SW, Fargo, North Dakota.
Recent events (2)
- — I (S) $2925
- — Z (S) $4500
1910.219 C04 I
- Issued
- Dec 13, 2012
- Abate by
- Feb 15, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(c)(4)(i): Unguarded projecting shaft end(s) did not present a smooth edge and end and projected more than one-half the diameter of the shaft: (a) For employees exposed to caught-in hazards while operating the finishing line sander at 3931 37th Avenue SW, Fargo, North Dakota.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.303 G01 I
- Issued
- Dec 13, 2012
- Abate by
- Feb 15, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.303(g)(1)(i): Working space for equipment likely to require examination, adjustment, servicing, or maintenance while energized shall comply with the dimensions listed in Table S-1, except as required or permitted elsewhere in this subpart: (a) For employees exposed to electrical shock hazards while accessing the electrical panel next to the rip line in-feed conveyor at 3931 37th Avenue SW, Fargo, North Dakota.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Solid Comfort, INC.
View Solid Comfort, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 337127)
More inspections in ND
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 336989785.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.