OMAHA, NE —
OSHA Inspection: QUALITY PORK INTERNATIONAL, INC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of QUALITY PORK INTERNATIONAL, INC in 10404 F PLZ., OMAHA, NE 68127 (NAICS 311612). OSHA activity number 336992185.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- QUALITY PORK INTERNATIONAL, INC
- Site address
- 10404 F PLZ.
- City
- OMAHA
- State
- NE
- ZIP
- 68127
- Mailing
- 10404 F PLZ., OMAHA, NE 68127
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 311612
- Employees
- 525
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.215 A04
- Issued
- Nov 27, 2012
- Abate by
- Dec 21, 2012
- Penalty
- Initial $4,400 · Current $2,860 Reduced
General-duty citation text
29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch: In the Maintenance of the facility the employer is failing to ensure that the work rest is adjusting to within one eight inch of the periphery of the abrasive wheel. Baldor Grinder CAT. NO. 662E SER. B11093008?8
Recent events (2)
- — I (S) $2860
- — Z (S) $4400
1910.219 C04 I
- Issued
- Nov 27, 2012
- Abate by
- Dec 21, 2012
- Penalty
- Initial $5,500 · Current $3,575 Reduced
General-duty citation text
29 CFR 1910.219(c)(4)(i): Unguarded projecting shaft end(s) projected more than one half the diameter of the shaft: Below the tumbler on line three the employer is failing to ensure that a shaft used to drive the tumbler does not extend out more than 1/2 the diameter of the shaft.
Recent events (2)
- — I (S) $3575
- — Z (S) $5500
1910.303 B01 II
- Issued
- Nov 27, 2012
- Abate by
- Dec 21, 2012
- Penalty
- Initial $6,600 · Current $4,290 Reduced
General-duty citation text
29 CFR 1910.303(b)(1)(ii): Electrical equipment was not free from recognized hazards, based on the mechanical strength and durability, including, for parts designed to enclose and protect other equipment, the adequacy of the protection thus provided: At the end of line 2 the employer is failing to ensure that the electrical outlet was not missing its cover and did not have cracks in the housing that exposed open electrical conductors to the wet environment.
Recent events (2)
- — I (S) $4290
- — Z (S) $6600
1910.305 B01 II
- Issued
- Nov 27, 2012
- Abate by
- Dec 21, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(b)(1)(ii): Unused openings in boxes, cabinets, or fittings were not effectively closed: By the Compactor the employer is failing to ensure that the 4x4 electrical box was equipped with a cover.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.305 G02 III
- Issued
- Nov 27, 2012
- Abate by
- Dec 21, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(g)(2)(iii): Flexible cords were not connected to devices and fittings so that tension would not be transmitted to joints or terminal screws: On Line 4 by the Dump Hoper the employer is failing to ensure that the flexible cords entering the electrical box were not pulled away from the electrical box allowing for tension to be transmitted to the joints or terminals.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at Quality Pork International, INC
View Quality Pork International, INC's full OSHA safety record →
More inspections in this industry (NAICS 311612)
More inspections in NE
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 336992185.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.