OSHA Inspection: MANUEL BUENO

Issued

Jul 10, 2013

Abate by

Aug 12, 2013

Penalty

Initial $400 · Current $400

General-duty citation text

29 CFR 1903.19(c)(1):  The employer did not certify to OSHA, within 10 calendar days after the abatement date, that the cited violation had been abated:   Manuel bueno, dba Bueno Construction failed to certify to OSHA within 10 calendar days after the abatement date that each of the following cited violations had been corrected:    Citation Number                     Item Number                           Abatement Date  01                                           01                                            03/27/2013 01                                            02                                            03/27/2013 01                                            03                                            03/27/2013 01                                            05                                            03/27/2013    In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).

Issued

Mar 21, 2013

Abate by

Mar 27, 2013

Penalty

Initial $2,000 · Current $2,000

General-duty citation text

29 CFR 1926.21(b)(2): The employer did not instruct each employee in the recognition and avoidance of unsafe conditions and the regulations applicable to his/her environment to control or eliminate any hazards or other exposure to illness or injury:    a) On or about October 17, 2012, the employer did not instruct or provide instruction to employees in the recognition and avoidance of unsafe conditions and the regulations applicable to their work environment to control or minimize the hazards associated with their work.    In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).

Issued

Mar 21, 2013

Abate by

Mar 27, 2013

Penalty

Initial $1,600 · Current $1,600

General-duty citation text

29 CFR 1926.304(i)(1): Each circular had-fed ripsaw was not guarded by a hood which completely enclosed that portion of the saw above the table and that portion of the saw above the material being cut:     a)  On or about October 17, 2013, employees were using an unguarded Shop Series RK7240.1 10" Table Saw and a  DeWalt 10" Table Saw while performing carpentry work onsite.         In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).

Issued

Mar 21, 2013

Abate by

Mar 27, 2013

Penalty

Initial $1,600 · Current $1,600

General-duty citation text

29 CFR 1926.403(b)(2): Listed, labeled, or certified equipment was not installed and used in accordance with instructions included in the listing, labeling, or certification:    a)  A metal electric outlet box was used in a temporary installation which is not in accordance with the listing and labeling of this equipment.      In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).

Issued

Mar 21, 2013

Penalty

Initial $2,800 · Current $2,800

General-duty citation text

29 CFR 1926.403(i)(2)(i): Live parts of electric equipment operating at 50 volts or more were not guarded against accidental contact by cabinets or other forms of enclosures, nor by any of the means listed in subparagraphs (A) through (D) of this paragraph:    a)  On or about October 17, 2012, employees were exposed to electrical hazards where electrical panels did not have covers exposing them to accidental contact with live parts.     No abatement certification or documentation is required for this item.

Issued

Mar 21, 2013

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1926.404(f)(6):  The path to ground from circuits, equipment, or enclosures was not permanent and continuous:       a)  On or about October 17, 2013, electrical receptacles used by employees to power tools on site did not have a permanent and continuous path to ground.      No abatement certification or documentation is required for this item.

Issued

Mar 21, 2013

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1926.405(j)(1)(i):  Fixtures, lampholders, lamps, rosettes, or receptacles had live parts exposed to employee contact:      a)  On or about October 17, 2013, electrical receptacles used by employees to power tools onsite had live parts exposed to accidental contact.       No abatement certification or documentation is required for this item.

Issued

Mar 21, 2013

Abate by

Mar 27, 2013

Penalty

Initial $1,600 · Current $1,600

General-duty citation text

29 CFR 1926.405(a)(2)(ii)(E):  Lamps used in temporary wiring for general illumination were not protected from accidental contact or breakage:    a)  On or about October 17, 2012, the employer did not ensure that the lamps used in temporary wiring to illuminate the work area were protected from accidental contact or breakage.    In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).