TAMUNING, GU —
OSHA Inspection: 5M CONSTRUCTION CORPORATION
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of 5M CONSTRUCTION CORPORATION in ROUTE 10A AIRPORT ROAD, TAMUNING, GU 96913 (NAICS 238140). OSHA activity number 337091599.
Where did this inspection happen?
- Establishment
- 5M CONSTRUCTION CORPORATION
- Site address
- ROUTE 10A AIRPORT ROAD
- City
- TAMUNING
- State
- GU
- ZIP
- 96913
- Mailing
- P.O. BOX 22285 GMF, BARRIGADA, GU 96921
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238140
- Employees
- 9
- Ownership type
- A
Citations
3 citations on file for this inspection.
1926.404 B01 I
- Issued
- Abate by
- Penalty
- Initial $1020.00 · Current $765.00 Reduced
General-duty citation text
29 CFR 1926.404(b)(1)(i): Employer did not use either ground fault circuit interrupters as specified in paragraph (b)(1)(ii) of this section, or an assured equipment grounding conductor program as specified in paragraph (b)(1)(iii) of this section to protect employees on construction sites. (a) At the project on or about October 29, 2012, and at times prior thereto, an assured equipment grounding conductor program was not in place and a ground-fault circuit-interrupter used to power portable tools was inoperative. Employees the used the 110V AC receptacle to charge Makita BL 1815 batteries and power various power tools.
Recent events (2)
- — I (S) $765
- — Z (S) $1020
1926.600 A03 I
- Issued
- Penalty
- Initial $1156.00 · Current $867.00 Reduced
General-duty citation text
29 CFR 1926.600(a)(3)(i): Bulldozer and scraper blades, end-loader buckets, dump bodies, or similar equipment were not fully lowered or blocked when being repaired or when not in use: (a) At the project site on or about October 29, 2012, and at times prior thereto, end-loader buckets, and outriggers on the CAT Backhoe, License 736 SEQ were not either fully lowered or blocked when not in use.
Recent events (2)
- — I (S) $867
- — Z (S) $1156
1926.600 A03 II
- Issued
- Penalty
- Initial $868.00 · Current $651.00 Reduced
General-duty citation text
29 CFR 1926.600(a)(3)(ii): Equipment was parked without the parking brake set: (a) At the project site on or about October 29, 2012, and at times prior thereto, the parking brake was not set on CAT Backhoe, License 736 SEQ. No operator was in site. The motor was off.
Recent events (2)
- — I (S) $651
- — Z (S) $868
More inspections at 5M CONSTRUCTION CORPORATION
TAMUNING, GU—2024-10-28 00:00:00
5M CONSTRUCTION CORPORATION
TAMUNING, GU—2024-05-08 00:00:00
5M CONSTRUCTION CORPORATION
TAMUNING, GU—2019-02-12 00:00:00
5M CONSTRUCTION CORPORATION
TAMUNING, GU—2018-07-18 00:00:00
5M CONSTRUCTION CORPORATION
HAGATNA, GU—2017-10-20 00:00:00
5M CONSTRUCTION CORPORATION
View 5M CONSTRUCTION CORPORATION's full OSHA safety record →
More inspections in this industry (NAICS 238140)
MARIANNA, FL—2026-07-13
PRIMETIME MOBILE MASONRY LLC
LOMPOC, CA—2026-07-10
UNKNOWN EMPLOYER
FREEHOLD, NJ—2026-07-10
CRAIG'S MASONRY & HARDSCAPE LLC
CINCINNATI, OH—2026-07-09
ALL AMERICAN CONCRETE LLC
NEW YORK, NY—2026-07-08
JEY CONSTRUCTIONS WORKS CORP
More inspections in GU
BARRIGADA, GU—2026-01-22
DURI CORPORATION
TAMUNING, GU—2026-01-21
DLR CORPORATION
BARRIGADA, GU—2026-01-21
DURI CORPORATION
TAMUNING, GU—2026-01-20
MG CONSTRUCTION COMPANY
BARRIGADA, GU—2026-01-20
PFM -VERTEX-LMS
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 337091599.