DOVER, NH —
OSHA Inspection: GM NAMEPLATE, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of GM NAMEPLATE, INC. in 27 PRODUCTION DR., DOVER, NH 03820 (NAICS 336399). OSHA activity number 337098990.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- GM NAMEPLATE, INC.
- Site address
- 27 PRODUCTION DR.
- City
- DOVER
- State
- NH
- ZIP
- 03820
- Mailing
- 27 PRODUCTION DR., DOVER, NH 03820
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 336399
- Employees
- 500
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.147 C04 I
- Issued
- Jan 28, 2013
- Abate by
- Feb 1, 2013
- Penalty
- Initial $5,000 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: a. Site - The employer did not develop, implement and utilize a lockout procedure for the Press Master #5(Model CFP-12T S/N 0800420-90) power press. b. Site - The employer did not develop, implement and utilize a lockout procedure for the Press Master (Model CFP-12T S/N 0800420-04) power press. c. Site -The employer did not develop, implement and utilize a lockout procedure for the Greennerd Press (Model HPB-10 S/N 99T5746) power press. d. Site - The employer did not develop, implement and utilize a lockout procedure for the Power Press (number D6). e. Site - The employer did not develop, implement and utilize a lockout procedure for the Power Press (number D8).
Recent events (3)
- — C (S) $5000
- — F (O) $5000
- — Z (S) $5000
1910.212 A01
- Issued
- Jan 28, 2013
- Abate by
- Feb 1, 2013
- Penalty
- Initial $5,000 · Current $5,000
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: Instance a. Site - Machine guarding was not provided to protect employees from the in-going nip point on the laminator #3 machinery rotating wheel. Instance b. Site - Machine guarding was not provided to protect employees from the in-going nip point on the tape cutter machine rotating paper roll.
Recent events (3)
- — C (S) $5000
- — F (S) $5000
- — Z (S) $5000
1910.212 A03 II
- Issued
- Jan 28, 2013
- Abate by
- Feb 1, 2013
- Penalty
- Initial $7,000 · Current $7,000
General-duty citation text
29 CFR 1910.212(a)(3)(ii): Point of operation guards were not designed and constructed as to prevent the operator from having any part of their body in the danger zone during the operating cycle: Instance a. Site - Point of operation guard was not provided at the flipping machine. Instance b. Site - Point of operation guard was not provided at the tape cutting machine.
Recent events (3)
- — C (S) $7000
- — F (S) $7000
- — Z (S) $7000
1910.217 B07 II
- Issued
- Jan 28, 2013
- Abate by
- Feb 1, 2013
- Penalty
- Initial $5,000 · Current $5,000
General-duty citation text
29 CFR 1910.217(b)(7)(ii): Mechanical power press(es) using part revolution clutches were not provided with a red color stop control, which would immediately deactivate the clutch and apply the brake, override any other control, and require use of the operating (tripping) means which has been selected: Instance a. The emergency stop control on the Press Master #5(model CFP-12T S/N 080-0420-90) power press was not accessible for the operator. Instance b. The emergency stop control on the Press Master (model CFP-12T S/N 080-0420-04) power press was not accessible for the operator. Instance c. The emergency stop control on the Greennerd Press (model HPB S/N 99T5746) power press was not accessible for the operator.
Recent events (3)
- — C (S) $5000
- — F (S) $5000
- — Z (S) $5000
1910.219 C02 I
- Issued
- Jan 28, 2013
- Abate by
- Feb 1, 2013
- Penalty
- Initial $5,000 · Current $5,000
General-duty citation text
29 CFR 1910.219(c)(2)(i): All exposed part(s) of horizontal shafting seven (7) feet or less from floor or working platform were not protected by stationary casing(s) enclosing shafting completely or by trough(s) enclosing sides and top or sides and bottom of shafting: Instance a. Site - The horizontal shaft on the Laminator # 3 was not adequately guarded on all sides to prevent employees from accidental contact during the rotation cycle. Instance b. Site - The horizontal shaft on the flipping machine was not adequately guarded on all sides to prevent employees from accidental contact during the rotation cycle.
Recent events (3)
- — C (S) $5000
- — F (S) $5000
- — Z (S) $5000
1910.219 C04
- Issued
- Jan 28, 2013
- Abate by
- Feb 1, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(c)(4): Projecting shaft ends. a. Site - The protruding shaft end on the Laminator #3 was not guarded to prevent accidental contact during rotation cycle.
Recent events (3)
- — C (S) $0
- — F (S) $0
- — Z (S) $0
1910.242 B
- Issued
- Jan 28, 2013
- Abate by
- Feb 1, 2013
- Penalty
- Initial $5,000 · Current $0 Reduced
General-duty citation text
29 CFR 1910.242(b): Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i.: a. Site - Compressed air utilized for cleaning purposes at employees' workstations was at 90 PSI.
Recent events (3)
- — C (S) $5000
- — F (O) $0
- — Z (S) $5000
More inspections at GM Nameplate, INC.
View GM Nameplate, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 336399)
More inspections in NH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 337098990.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.