BOZEMAN, MT —
OSHA Inspection: VAN DYKE REMODELING & CONSTRUCTION
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of VAN DYKE REMODELING & CONSTRUCTION in QUAIL RUN RIDGELINE/TIMBERVIEW, BOZEMAN, MT 59715 (NAICS 238130). OSHA activity number 337144018.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- VAN DYKE REMODELING & CONSTRUCTION
- Site address
- QUAIL RUN RIDGELINE/TIMBERVIEW
- City
- BOZEMAN
- State
- MT
- ZIP
- 59715
- Mailing
- 5590 STAFFANSON DRIVE, BOZEMAN, MT 59718
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238130
- Employees
- 3
- Ownership type
- A
Citations
7 citations on file for this inspection.
1926.100 A
- Issued
- Nov 2, 2012
- Abate by
- Nov 27, 2012
- Penalty
- Initial $1,600 · Current $800 Reduced
General-duty citation text
29 CFR 1926.100(a): Employees working in areas where there is a possible danger of head injury from impact, or from falling or flying objects, or from electrical shock and burns, were not protected by protective helmets: (a) Construction Site: On or about November 01, 2012, and at times prior thereto, employees were exposed to overhead hazards while working below roof construction without overhead protection.
Recent events (2)
- — I (S) $800
- — Z (S) $1600
1926.304 I01
- Issued
- Nov 2, 2012
- Abate by
- Nov 27, 2012
- Penalty
- Initial $2,000 · Current $0 Reduced
General-duty citation text
29 CFR 1926.304(i)(1): Each circular hand-fed rip saw was not guarded by a hood which completely enclosed that portion of the saw blade above the table and that portion of the saw above the material being cut: (a) Construction Site: On or about November 01, 2012, and at times prior thereto, employees were exposed to amputations and being struck by pieces of wood while ripping grained lumber without guards and kickback protection.
Recent events (2)
- — I (S) $0
- — Z (S) $2000
1926.404 B02
- Issued
- Nov 2, 2012
- Abate by
- Nov 27, 2012
- Penalty
- Initial $1,600 · Current $0 Reduced
General-duty citation text
29 CFR 1926.404(b)(2): Listed, labeled, or certified equipment was not installed and used in accordance with instructions included in the listing, labeling, or certification: (a) Construction Site: On or about November 01, 2012, and at times prior thereto, employees were exposed to an electrical shock while using a metal junction box designed for internal wall use as an external, portable power supply.
Recent events (2)
- — I (S) $0
- — Z (S) $1600
1926.404 F06
- Issued
- Nov 2, 2012
- Abate by
- Nov 27, 2012
- Penalty
- Initial $1,600 · Current $0 Reduced
General-duty citation text
29 CFR 1926.404(f)(6): The path to ground from circuits, equipment, or enclosures was not permanent and continuous: (a) Construction Site: On or about November 01, 2012, and at times prior thereto, employees were exposed to an electrical shock while ripping lumber with a table saw with a missing ground pin.
Recent events (2)
- — I (S) $0
- — Z (S) $1600
1926.416 E01
- Issued
- Nov 2, 2012
- Abate by
- Nov 27, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.416(e)(1): Worn or frayed electric cords or cables were used: (a) Construction Site: On or about November 01, 2012, and at times prior thereto, employees were exposed to an electrical shock while ripping lumber with a table saw with a frayed power supply cord.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.501 B13
- Issued
- Nov 2, 2012
- Abate by
- Nov 27, 2012
- Penalty
- Initial $1,600 · Current $1,000 Reduced
General-duty citation text
29 CFR 1926.501(b)(13): Each employee engaged in residential construction activities 6 feet (1.8 m) or more above lower levels was not protected by guardrail systems, safety net system, or personal fall arrest system: (a) Construction Site: On or about November 01, 2012, and at times prior thereto, employees were exposed to a fall of approximately ten feet to the ground below while framing on the trusses and gable of a 6:12 pitch roof.
Recent events (2)
- — I (S) $1000
- — Z (S) $1600
1926.503 A01
- Issued
- Nov 2, 2012
- Abate by
- Nov 27, 2012
- Penalty
- Initial $1,600 · Current $500 Reduced
General-duty citation text
29 CFR 1926.503(a)(1): The employer did not provide an effective training program for each employee who was exposed to fall hazards. The program shall enable each employee to recognize the hazards of falling and shall train each employee in the procedures to be followed in order to minimize these hazards: (a) Construction Site: On or about November 01, 2012, and at times prior thereto, employees were exposed to a fall of approximately ten feet to the ground below due to lack of adequate training in the recognition of fall hazards and the means to control these hazards.
Recent events (2)
- — I (S) $500
- — Z (S) $1600
More inspections in this industry (NAICS 238130)
More inspections in MT
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 337144018.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.