SUMMERFIELD, TX —
OSHA Inspection: BAR G FEEDYARD
Federal Agency inspection · Safety discipline
At a glance
On , OSHA opened a federal Agency safety inspection of BAR G FEEDYARD in 275 FM 1057, SUMMERFIELD, TX 79085 (NAICS 112112). OSHA activity number 337151781.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- BAR G FEEDYARD
- Site address
- 275 FM 1057
- City
- SUMMERFIELD
- State
- TX
- ZIP
- 79085
- Mailing
- PO BOX 1797, HEREFORD, TX 79045
What kind of inspection was it?
- Inspection type
- Federal Agency (M)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- Yes
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 112112
- Employees
- 100
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.177 C01
- Issued
- Apr 24, 2013
- Abate by
- May 6, 2013
- Penalty
- Initial $4,900 · Current $4,900
General-duty citation text
29 CFR 1910.177(c)(1): The employer did not provide a program to train all employees who service rim wheels in the hazards involved and the safety procedures to follow while servicing rim wheels: On or about October 31, 2012, employees were exposed to struck-by hazards in that the employer had not established and implemented a program to train employees in servicing multi-piece tire rims.
Recent events (2)
- — I (S) $4900
- — Z (S) $4900
1910.177 C01 I
- Issued
- Apr 24, 2013
- Abate by
- May 6, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.177(c)(1)(i): The employer did not assure that no employee services any multi-piece rim wheel unless the employee has been trained and instructed in the correct and safe operating procedures described in 29 CFR 1910.177(f) of this section: On or about October 32, 2012, employees were exposed to struck-by hazards in that the employer did not ensure that employees were trained and instructed to service such as inflating multi-piece rim tires.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.177 F
- Issued
- Apr 24, 2013
- Abate by
- Jun 28, 2013
- Penalty
- Initial $4,900 · Current $0 Reduced
General-duty citation text
29 CFR 1910.177(f): The employer did not establish a safe operating procedure for servicing multi-piece rim wheels which contained, at a minimum, the elements listed in 29 CFR 1910.177(f)(1) through (11): On or about October 31, 2012, employees were exposed to struck-by hazards in that the employer did not establish and implement a safe operating procedure for employees who inflated multi-piece rim tires.
Recent events (2)
- — I (S) $0
- — Z (S) $4900
1910.177 D01
- Issued
- Apr 24, 2013
- Abate by
- Jun 28, 2013
- Penalty
- Initial $4,900 · Current $4,900
General-duty citation text
29 CFR 1910.177(d)(1): The employer did not furnish a restraining device for employees to use while inflating tires on multi-piece wheels: On or about October 31, 2012, employees were exposed to struck-by hazards in that the employer did not ensure tahat a restraining device was in place whem employees inflated multi-piece rim tires on the equipment.
Recent events (2)
- — I (S) $4900
- — Z (S) $4900
1910.177 D05
- Issued
- Apr 24, 2013
- Abate by
- Jun 28, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.177(d)(5): Current charts (rim manuals) containing instructions for the type of wheels being serviced were not available in the service area: On or about October 31, 2012, employees were exposed to struck-by hazards in that the employer did not ensure that charts or rim manuals were available for the type of multi-piece rim tires the employees were inflating.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.178 L01 II
- Issued
- Apr 24, 2013
- Abate by
- May 13, 2013
- Penalty
- Initial $2,100 · Current $2,100
General-duty citation text
29 CFR 1910.178(l)(1)(ii): The employer did not ensure that each operator had successfully completed the training required by paragraph (l), except as permitted by paragraph (l)(5), prior to permitting an employee to operate a powered industrial truck: On or about October 31, 2012, employees were exposed to struck-by and caught-between hazards in that the employer did not ensure that employees were trained as outlined in paragraph (l) of this standard.
Recent events (2)
- — I (S) $2100
- — Z (S) $2100
1904.39 A
- Issued
- Apr 24, 2013
- Abate by
- Apr 30, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1904.39(a): The employer did not orally report the death of an employee or the in-patient hospitalization of three or more employees because of a work-related incident. On or about October 31, 2012, the employer failed to report, within 8 hours, the workplace death of an employee.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at BAR G Feedyard
View BAR G Feedyard's full OSHA safety record →
More inspections in this industry (NAICS 112112)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 337151781.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.