OSHA Inspection: REMZO MUSIC

Issued

Apr 12, 2013

Abate by

May 15, 2013

Penalty

Initial $400 · Current $400

General-duty citation text

29 CFR 1903.19(c)(1):  The employer did not certify to OSHA, within 10 calendar days after the abatement date, that the cited violation had been abated:    Remzo Music dba Scope of Work, failed to certify to OSHA within 10 calendar days after the abatement date that each of the following cited violations had been corrected:     Citation Number                     Item Number                           Abatement Date  01                                            01                                            12/19/2012  01                                            02                                            12/19/2012  01                                            03                                            12/19/2012  01                                            04a                                          01/28/2013 01                                            04b                                          01/28/2013     In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).

Issued

Dec 7, 2012

Abate by

Dec 19, 2012

Penalty

Initial $2,800 · Current $2,800

General-duty citation text

29 CFR 1926.451(b)(1)(i):     Each platform unit (e.g., scaffold plank, fabricated plank, fabricated deck, or fabricated platform) was not installed so that the space between adjacent units and the space between the platform and the uprights were no more than 1 inch (2.5 cm) wide, except where the employer can demonstrate that a wider space is necessary:    a)  Employer did not ensure that the working levels of the supported scaffolding system were completely planked.  Employees were exposed to falling up to approximately 25 feet to the lower levels of the site.    **In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.**

Issued

Dec 7, 2012

Abate by

Dec 19, 2012

Penalty

Initial $2,000 · Current $2,000

General-duty citation text

29 CFR 1926.451(e)(1):     When scaffold platforms were more than 2 feet (0.6 m) above or below a point of access, portable ladders, hook-on ladders, attachable ladders, stair towers (scaffold stairways/towers), stairway-type ladders (such as ladder stands), ramps, walkways, integral prefabricated scaffold access, or direct access from other scaffold, sturcure, personnel hoist, or similar surface was not used.  Crossbraces were used as a means of access:    a) Employees were not provided a safe means to access/egress the working levels of the supported scaffolding system.  Employees were observed climbing the cross bracing of the scaffolding system.      **In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).**

Issued

Dec 7, 2012

Abate by

Dec 19, 2012

Penalty

Initial $2,800 · Current $2,800

General-duty citation text

29 CFR 1926.451(g)(1):     Employees on scaffolds more than 10 feet (3.1 m) above a lower level were not protected from falling to that lower level by fall protection established in paragraphs (g)(1)(i)-(vii) of this section:    a)  Employer did not ensure that the employees were protected from falling from the working levels of the supported scaffolding system.  Employees were exposed to falling up to approximately 25 feet to the lower levels of the site.    **In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.**

Issued

Dec 7, 2012

Abate by

Jan 28, 2013

Penalty

Initial $2,000 · Current $2,000

General-duty citation text

29 CFR 1926.454(a):     The employer did not have each employee who performed work while on a scaffold trained by a person qualified in the subject matter to recognize the hazards associated with the type of scaffold being used and to understand the procedures to control or minimize those hazards:    a)  The employer did not ensure that its employees were trained to recognize, control or minimize the hazards associated with the use of the tubular welded framed scaffolding system utilized at the site.    **In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).**

Issued

Dec 7, 2012

Abate by

Jan 28, 2013

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1926.454(b):     The employer did not have each employee involved in erecting, disassembling, moving, operating, repairing, maintaining, or inspecting a scaffold trained by a competent person to recognize any hazards associated with the work in question:    a)  The employer did not ensure that its employees were trained to recognize, control or minimize the hazards associated with the erection, operation and maintenance of the scaffolding system utilized at the site.    **In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).**