BRYAN, TX —
OSHA Inspection: FELIPE GARCIA JR.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of FELIPE GARCIA JR. in 1000 N. EARL RUDDER FREEWAY, BRYAN, TX 77802 (NAICS 238140). OSHA activity number 337167985.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- FELIPE GARCIA JR.
- Site address
- 1000 N. EARL RUDDER FREEWAY
- City
- BRYAN
- State
- TX
- ZIP
- 77802
- Mailing
- 4467 ARTHUR LN., COLLEGE STATION, TX 77845
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238140
- Employees
- 6
- Ownership type
- A
Citations
4 citations on file for this inspection.
1926.100 A
- Issued
- Dec 14, 2012
- Abate by
- Dec 17, 2012
- Penalty
- Initial $1,200 · Current $1,200
General-duty citation text
29 CFR 1926.100(a): Employees were not protected by protective helmets while working in areas where there was a possible danger of head injury from impact, or from falling or flying objects, or from electrical shock and burns. On or about November 01, 2012, employees were working from a welded frame scaffold and were not provided with hard hats while other employees were working above them, exposing employees to the hazard of being struck by falling tools or materials. Pursuant to 29 C.F.R. 1903.19, within ten (10) calendar days of the date of this citation, the employer must submit documentation showing that it is in compliance with the standard, including describing the steps that it is taking to ensure that employees are provided and utilizing protective helmets where overhead hazards exist.
Recent events (1)
- — Z (S) $1200
1926.451 B01
- Issued
- Dec 14, 2012
- Abate by
- Dec 17, 2012
- Penalty
- Initial $1,600 · Current $1,600
General-duty citation text
29 CFR 1926.451(b)(1): Each platform on all working levels of scaffolds was not fully planked or decked between the front uprights and the guardrail supports as specified in paragraphs 1926.451(b)(1)(i)-(ii) On or about November 01, 2012, employees were working from two welded frame scaffolds that are two tiers in height and 5 sections in length where the work platforms were not fully planked or decked, exposing employees to the hazard of 12 foot falls. Pursuant to 29 C.F.R. 1903.19, within ten (10) calendar days of the date of this citation, the employer must submit documentation showing that it is in compliance with the standard, including describing the steps that it is taking to ensure that each platform on all working levels of scaffolds are fully planked.
Recent events (1)
- — Z (S) $1600
1926.451 E01
- Issued
- Dec 14, 2012
- Abate by
- Dec 17, 2012
- Penalty
- Initial $1,200 · Current $1,200
General-duty citation text
29 CFR 1926.451(e)(1): When scaffold platforms are more than 2 feet (0.6 m) above or below a point of access, portable ladders, hook-on ladders, attachable ladders, stair towers (scaffold stairways/towers), stairway-type ladders (such as ladder stands), ramps, walkways, integral prefabricated scaffold access, or direct access from another scaffold, structure, personnel hoist, or similar surface shall be used. Cross braces shall not be used as a means of access. On or about November 01, 2012, employees were working from two welded frame scaffolds which measured 2 tiers in height and 5 sections in length and both scaffold were not provide with a ladder for access and egress to and from the scaffold, exposing employees to the hazard of 12 foot falls. Pursuant to 29 C.F.R. 1903.19, within ten (10) calendar days of the date of this citation, the employer must submit documentation showing that it is in compliance with the standard, including describing the steps that it is taking to ensure that ladders are provided to employees accessing scaffolding.
Recent events (1)
- — Z (S) $1200
1926.451 G01
- Issued
- Dec 14, 2012
- Abate by
- Dec 17, 2012
- Penalty
- Initial $1,224 · Current $1,224
General-duty citation text
29 CFR 1926.451(g)(1): Employees on scaffolds more than 10 feet (3.1 m) above a lower level were not protected from falling to that lower level by fall protection established in paragraphs (g)(1)(i)-(vii) of this section: On or about November 01, 2012, employees were working from two welded frame scaffold which were 2 tiers in height and 5 sections in length, one on the front, East side, of the building which was not provided with guard railing at all and the other on the North side of the building which had guard railing, but was missing on one section of the scaffold, exposing employees to the hazard of 12 foot falls. Pursuant to 29 C.F.R. 1903.19, within ten (10) calendar days of the date of this citation, the employer must submit documentation showing that it is in compliance with the standard, including describing the steps that it is taking to ensure that employees on scaffolds more than 10 feet above a lower level are protected from falling to that lower level by fall protection.
Recent events (1)
- — Z (S) $1224
More inspections in this industry (NAICS 238140)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 337167985.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.