DAYTON, OH ·
OSHA Inspection: KETTERING KUSTOM, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of KETTERING KUSTOM, INC. in 5501 FAR HILLS AVE., DAYTON, OH 45429 (NAICS 238140). OSHA activity number 337214035.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- KETTERING KUSTOM, INC.
- Site address
- 5501 FAR HILLS AVE.
- City
- DAYTON
- State
- OH
- ZIP
- 45429
- Mailing
- 851 TWIN OAKS DR., DAYTON, OH 45431
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238140
- Employees
- 5
- Ownership type
- Private (A)
Citations
3 citations on file for this inspection.
1926.451 B01
- Issued
- Nov 23, 2012
- Abate by
- Jan 11, 2013
- Penalty
- Initial $2,800 · Current $0 Reduced
General-duty citation text
29 CFR 1926.451(b)(1): Platform(s) on all working levels of scaffolds, were not fully planked or decked between the front uprights and guardrail supports: -On the upper working level of the tubular welded frame scaffold, employees were performing grinding and tuck pointing operations while the scaffold platform was not fully decked, exposing employees to a potential fall hazard of 33'. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence, or written records.
Recent events (2)
- · I (S) $0
- · Z (S) $2800
1926.451 F07
- Issued
- Nov 23, 2012
- Abate by
- Jan 11, 2013
- Penalty
- Initial $2,800 · Current $0 Reduced
General-duty citation text
29 CFR 1926.451(f)(7): Scaffolds were not erected, moved, dismantled, or altered, by trained and experienced employees under the supervision and direction of a competent person qualified in scaffold erection, moving, dismantling or alteration:; Such activities were not performed only by experienced and trained employees selected for such work by the competent person. -The tubular welded frame scaffold that was in use was not erected by a competent person in that the employees were working on a platform that was not fully decked while not using any type of fall protection system. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence, or written records.
Recent events (2)
- · I (S) $0
- · Z (S) $2800
1926.451 G01
- Issued
- Nov 23, 2012
- Abate by
- Jan 11, 2013
- Penalty
- Initial $2,800 · Current $2,800
General-duty citation text
29 CFR 1926.451(g)(1): Employees on scaffolds more than 10 feet (3.1 m) above a lower level were not protected from falling to that lower level by fall protection established in paragraphs (g)(1)(i)-(vii) of this section: -Employees were performing grinding and tuck-pointing operations on a tubular welded frame scaffold while not using any type of fall protection system. Working platform height was measured to be 33'. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence, or written records.
Recent events (2)
- · I (S) $2800
- · Z (S) $2800
More inspections in this industry (NAICS 238140)
More inspections in OH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 337214035.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.