MANCHESTER, CT —
OSHA Inspection: CREATIVE MOBILE SYSTEMS, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of CREATIVE MOBILE SYSTEMS, INC. in 189 ADAMS STREET, MANCHESTER, CT 06040 (NAICS 333319). OSHA activity number 337287429.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CREATIVE MOBILE SYSTEMS, INC.
- Site address
- 189 ADAMS STREET
- City
- MANCHESTER
- State
- CT
- ZIP
- 06040
- Mailing
- PO BOX 8198, MANCHESTER, CT 06042
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 333319
- Employees
- 6
- Ownership type
- A
Citations
6 citations on file for this inspection.
5(a)(1)
- Issued
- Dec 19, 2012
- Abate by
- Jan 16, 2013
- Penalty
- Initial $2,000 · Current $2,000
General-duty citation text
OSH ACT of 1970 Section (5)(a)(1): Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that, employees were exposed to crushing hazards: a) Shop and Yard off loading area - On or about 11-9-12 - Employees operating a Komatsu industrial fork truck, S/N 171429, Model FG259-4, were not provided with seat belts.
Recent events (2)
- — I (S) $2000
- — Z (S) $2000
1910.23 C01
- Issued
- Dec 19, 2012
- Abate by
- Jan 16, 2013
- Penalty
- Initial $1,600 · Current $1,600
General-duty citation text
29 CFR 1910.23(c)(1): Open-sided floors and/or platforms four feet or more above adjacent floor or ground level were not guarded with standard railings (or equivalent) and toeboards: a) 189 Adams Street, Storage and Repair Area - On or about 11-9-12 - Employees were exposed to fall hazards from a five foot unguarded opening on the storage area floor by the stairway.
Recent events (2)
- — I (S) $1600
- — Z (S) $1600
1910.23 D01 II
- Issued
- Dec 19, 2012
- Abate by
- Jan 16, 2013
- Penalty
- Initial $1,600 · Current $0 Reduced
General-duty citation text
29 CFR 1910.23(d)(1)(ii): Stairway(s) less than 44 inches wide having one side open, did not have at least one stair railing on the open side: a) 189 Adams Street, Storage and Repair Area - On or about 11-9-12 - Employees were exposed to fall hazards from 32 inch wide stairway to the second floor storage area that had the mid-rail missing from the stair rail system.
Recent events (2)
- — I (S) $0
- — Z (S) $1600
1910.178 A06
- Issued
- Dec 19, 2012
- Abate by
- Jan 16, 2013
- Penalty
- Initial $2,000 · Current $400 Reduced
General-duty citation text
29 CFR 1910.178(a)(6): The employer did not ensure that all nameplates or markings were maintained in a legible condition: a) 189 Adams Street - On or about 11-9-12 - Komatsu Industrial Fork Truck, Model FG259-4, S/N 171429 did not have the operating controls labeled.
Recent events (2)
- — I (O) $400
- — Z (S) $2000
1910.212 A03 II
- Issued
- Dec 19, 2012
- Abate by
- Apr 16, 2013
- Penalty
- Initial $2,000 · Current $2,000
General-duty citation text
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): a) 189 Adams Street, Metal Bending Area - On or about 11-2-12 - Employees were exposed to crushed by or ampuation hazards from unguarded Verson Allsteel Press Co. press brake.
Recent events (2)
- — I (S) $2000
- — Z (S) $2000
1910.219 F01
- Issued
- Dec 19, 2012
- Abate by
- Jan 16, 2013
- Penalty
- Initial $2,000 · Current $0 Reduced
General-duty citation text
29 CFR 1910.219(f)(1): Gear(s) were not guarded by a complete enclosure or by one of the methods specified in 29 CFR 1910.219(f)(1)(ii) and (f)(1)(iii): a) 189 Adams Street, Metal Bending Area - On or about 11-9-12 - Gear drive on Verson Allsteel Press Co. press brake which was less then 7 feet above ground was not fully enclosed exposing employee to crushing hazard.
Recent events (2)
- — I (S) $0
- — Z (S) $2000
More inspections in this industry (NAICS 333319)
More inspections in CT
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 337287429.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.