OSHA Inspection: ALL SOUTH FABRICATORS, INC.

Issued

Jan 25, 2013

Abate by

Feb 6, 2013

Penalty

Initial $1,600 · Current $960 Reduced

General-duty citation text

29 CFR 1910.22(a)(1): All places of employment, passageways, storerooms or service rooms were not kept clean and orderly or in a sanitary condition:      (a)  On or about 11/08/12 - Shear Area, the passageway around the Elga Hydrashear was not kept clear of sheared material exposing employees to falling debris and tripping hazards.

Issued

Jan 25, 2013

Abate by

Feb 6, 2013

Penalty

Initial $2,000 · Current $1,200 Reduced

General-duty citation text

29 CFR 1910.179(j)(2): The following items were not be inspected for defects at intervals as defined in paragraph (j)(1)(ii) of this section or as specifically indicated, including observation during operation for any defects which might appear between regular inspections:      (a)  On or about 11/08/12 - Facility, crane inspections were not performed.

Issued

Jan 25, 2013

Penalty

Initial $2,000 · Current $1,200 Reduced

General-duty citation text

29 CFR 1910.184(c)(1): Sling(s) that were damaged or defective were used:      (a)  On or about 11/08/12 - Finishing Area, the synthetic web sling used to lift finished products was badly frayed and damaged.

Issued

Jan 25, 2013

Abate by

Mar 1, 2013

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.132(d)(2): The employer did not verify, through a written certification, that the required workplace hazard assessment had been performed:      (a)  On or about 11/08 - Facility, no written certification to verify the hazard assessment had been performed.

Issued

Jan 25, 2013

Abate by

Mar 1, 2013

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.134(c)(1): A written respiratory protection program that included the provisions in 29 CFR 1910.134(c)(1)(i)-(ix) with worksite specific procedures was not established and implemented for required respirator use:       (a) On or about 11/08/12 - Welding, the employer did not develop and implement a written respirator program for employees required to wear respiratory protection.

Issued

Jan 25, 2013

Abate by

Mar 1, 2013

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.147(c)(1): The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative:      (a)  On or about 11/08/12 - Facility, a written lockout/tagout program had not been established for employees performing servicing and maintenance on equipment such as, but not limited to, shears, press brakes, band saws, cranes, and other equipment.

Issued

Jan 25, 2013

Abate by

Mar 1, 2013

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met:      (a) On or about 11/08/12 - Facility, the employer did not develop and implement a written hazard communication program working with hazardous chemicals including, but not limited to, various paints and primers.