WILTON, CT —
OSHA Inspection: NATS CONTRACTORS, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of NATS CONTRACTORS, INC. in STATION RD., WILTON, CT 06897 (NAICS 238170). OSHA activity number 337379846.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- NATS CONTRACTORS, INC.
- Site address
- STATION RD.
- City
- WILTON
- State
- CT
- ZIP
- 06897
- Mailing
- 2 FALBO DR., SEYMOUR, CT 06483
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238170
- Employees
- 3
- Ownership type
- A
Citations
5 citations on file for this inspection.
1926.102 A01
- Issued
- Jan 11, 2013
- Abate by
- Jan 24, 2013
- Penalty
- Initial $2,000 · Current $1,200 Reduced
General-duty citation text
29 CFR 1926.102(a)(1): Eye and face protective equipment were not used when machines or operations presented potential eye or face injury from physical, chemical, or radiation agents. Worksite: The employee who was installing trim boards with a pneumatic nail gun was not wearing eye protection.
Recent events (2)
- — I (S) $1200
- — Z (S) $2000
1926.304 I01
- Issued
- Jan 11, 2013
- Abate by
- Jan 24, 2013
- Penalty
- Initial $2,000 · Current $1,200 Reduced
General-duty citation text
29 CFR 1926.304(i)(1): Each circular had-fed ripsaw was not guarded by a hood whcih completely enclosed that portion of the saw above the table and that portion of the saw above the material being cut. Worksite: The Ridgid circular hand fed rip saw that was used by employees to rip/cut trim boards was not guarded with a hood that completely enclosed the portion of the saw above the table.
Recent events (2)
- — I (S) $1200
- — Z (S) $2000
1926.451 B02
- Issued
- Jan 11, 2013
- Abate by
- Jan 24, 2013
- Penalty
- Initial $2,800 · Current $1,680 Reduced
General-duty citation text
29 CFR 1926.451(b)(2): Scaffold platforms and walkways were not at least 18 inches wide. Worksite: The scissor lifts mid rail from which the employee was standing on/working from was not at least 18 inches wide.
Recent events (2)
- — I (S) $1680
- — Z (S) $2800
1926.451 G01 VII
- Issued
- Jan 11, 2013
- Abate by
- Jan 24, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.451(g)(1)(vii): Each employee on a scaffold, not otherwise specified in paragraphs (g)(1)(i) through (g)(1)(vi) of this section, more than 10 feet (3.1 m) above lower level was not protected from falls by the use of personal fall arrest systems or guardrail systems meeting the requirements of paragraph (g)(4) of this section. Worksite: The employee who was working from the scissor lifts mid rail at a height of approximately 20 feet above the ground was not protected from fall hazards by the use of a personal fall arrest system.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.454 A01
- Issued
- Jan 11, 2013
- Abate by
- Feb 7, 2013
- Penalty
- Initial $2,000 · Current $1,200 Reduced
General-duty citation text
29 CFR 1926.454(a)(1): The employer failed to have each employee who performs work while on a scaffold trained regarding the nature of any electrical hazards, fall hazards and falling object hazards in the work area. Worksite: The employees who were working from scissor lift elevated work platform/scaffold at a height of approximately 20 feet above the ground were not trained to recognize the hazards associated with the type of scaffold being used.
Recent events (2)
- — I (S) $1200
- — Z (S) $2000
More inspections at Nats Contractors, INC.
View Nats Contractors, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 238170)
More inspections in CT
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 337379846.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.