MISSOULA, MT —
OSHA Inspection: TRIPP LUMBER COMPANY INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of TRIPP LUMBER COMPANY INC. in 3000 RASER DRIVE, MISSOULA, MT 59808 (NAICS 321113). OSHA activity number 337485411.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- TRIPP LUMBER COMPANY INC.
- Site address
- 3000 RASER DRIVE
- City
- MISSOULA
- State
- MT
- ZIP
- 59808
- Mailing
- 3000 RASER DRIVE, MISSOULA, MT 59808
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321113
- Employees
- 13
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.147 C04 I
- Issued
- Feb 26, 2013
- Abate by
- Mar 16, 2013
- Penalty
- Initial $2,000 · Current $500 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: a) 3000 Raser Dr. Missoula, MT 59808: On November 9, 2012 and at times prior there to, employee(s) were exposed to the unexpected startup of equipment that was being setup, maintained or serviced due to not having documented procedures for controlling all energy sources of equipment. Equipment includes but not limited to: the unit saw, planers and jointers.
Recent events (2)
- — I (S) $500
- — Z (S) $2000
1910.147 C06 II
- Issued
- Feb 26, 2013
- Abate by
- Mar 16, 2013
- Penalty
- Initial $2,000 · Current $500 Reduced
General-duty citation text
29 CFR 1910.147(c)(6)(ii): The employer did not certify that periodic inspections of the energy control procedures had been performed: a) 3000 Raser Dr. Missoula, MT 59808: On November 9, 2012 and at times prior there to, Tripp Lumber Company, Inc. did not certify that a periodic inspection of at least annually was performed of their energy control procedures. Equipment includes but not limited to: the unit saw, planers and jointers.
Recent events (2)
- — I (S) $500
- — Z (S) $2000
1910.147 C07 IV
- Issued
- Feb 26, 2013
- Abate by
- Mar 16, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(7)(iv): The employer did not certify that employee training had been accomplished and kept up to date: a) 3000 Raser Dr. Missoula, MT 59808: On November 9, 2012 and at times prior there to, Tripp Lumber Company, Inc. did not certify that employee training had been completed on the company's energy control program. Equipment that is locked and tagged out includes but not limited to: the unit saw, planers and jointers.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.212 A01
- Issued
- Feb 26, 2013
- Abate by
- Mar 16, 2013
- Penalty
- Initial $2,000 · Current $500 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) 3000 Raser Dr. Missoula, MT 59808: On November 9, 2012 and at times prior there to, employee(s) were exposed to amputation hazards from the unguarded bar and chain while using the unit saw to cut lumber.
Recent events (2)
- — I (S) $500
- — Z (S) $2000
1910.265 C18 I
- Issued
- Feb 26, 2013
- Abate by
- Mar 16, 2013
- Penalty
- Initial $2,000 · Current $500 Reduced
General-duty citation text
29 CFR 1910.265(c)(18)(i): Pulley(s), sprocket(s), sheave(s), drum(s) and block(s) of conveyor(s) were not arranged to prevent the possibility of injury due to hands or parts of clothing being caught between the belt(s) and pulley(s) or chain(s) and sprockets: a) 3000 Raser Dr. Missoula, MT 59808: On November 9, 2012 and at times prior there to, employee(s) were exposed to crushing and/or amputation hazards from unguarded chains and sprockets on the unit saw flush bump.
Recent events (2)
- — I (S) $500
- — Z (S) $2000
More inspections at Tripp Lumber Company INC.
View Tripp Lumber Company INC.'s full OSHA safety record →
More inspections in this industry (NAICS 321113)
More inspections in MT
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 337485411.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.