Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,198,547Inspections Most recent open 2026-09-01 Last loaded 2026-09-04

OSHA Inspection: STRADER BUILDING LLC

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of STRADER BUILDING LLC in 115 E 80TH ST, STILLWATER, OK 74074 (NAICS 238120). OSHA activity number 337534416.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Strader Building LLC for free Get an email when a new federal OSHA severe-injury report for Strader Building LLC is published. One employer, no account, unsubscribe in one click.
Site address
115 E 80TH ST
City
STILLWATER
State
OK
ZIP
74074
Mailing
16501 GUNSMOKE RD, PERRY, OK 73077
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
Non-union (B)
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238120
Employees
5
Ownership type
Private (A)

5 citations on file for this inspection.

1926.102 A02

Serious Gravity 1 2 instances 2 exposed
Issued
Mar 21, 2013
Abate by
Mar 25, 2013
Penalty
Initial $1,200 · Current $720 Reduced
29 CFR 1926.102(a)(2):     Eye and face protective equipment being used did not meet the requirements specified in Z 87.1-1968:    South end of the building:  On or about November 7, 2012, two employees attaching metal panels to the walls of a system engineered building wore prescription eyewear that did meet the requirement of the American National Standard Insititute Standard (ANSI) Z 87.1-1968.  This exposed the employees to the hazard of being struck in the eyes by metal debris.
Recent events (2)
  • · I (S) $720
  • · Z (S) $1200

1926.451 A06

Serious Gravity 5 1 instance 2 exposed
Issued
Mar 21, 2013
Abate by
Mar 29, 2013
Penalty
Initial $1,600 · Current $960 Reduced
29 CFR 1926.451(a)(6):     Scaffolds were not designed by a qualified person:    South side of the building:  On or about November 7, 2012, and times prior to, employees erecting a metal system engineered building used a platform supported by a rough terrain forklift.  The platform had not been designed by qualified person, and its design and use was deficient.  This exposed the employees to the hazards of falling over 10 feet and/or failure of the forklift.
Recent events (2)
  • · I (S) $960
  • · Z (S) $1600

1926.451 C02 IV

Serious Gravity 5 1 instance 2 exposed
Issued
Mar 21, 2013
Abate by
Mar 29, 2013
Penalty
Initial $0 · Current $0
29 CFR 1926.451(c)(2)(iv):     Front-end loaders and similar pieces of equipment were used to support scaffold platforms without being specifically designed by the manufacturer for such use:    South side of the building:  On or about November 7, 2012, and times prior to, employees erecting a metal system engineered building used a platform supported by a rough terrain forklift.  The manufacturer instructions warned that the forklift was not designed to lift personnel.  This exposed the employees to the hazards of falling over 10 feet and/or failure of the forklift.
Recent events (2)
  • · I (S) $0
  • · Z (S) $0

1926.602 C01 II

Serious Gravity 5 1 instance 2 exposed
Issued
Mar 21, 2013
Abate by
Mar 29, 2013
Penalty
Initial $0 · Current $0
29 CFR 1926.602(c)(1)(ii):     Modifications or additions which affect the capacity or safe operation of the equipment were made without the manufacturer's written approval:    South side of the building:  On or about November 7, 2012, and times prior to, employees erecting a metal system engineered building used a platform supported by a rough terrain forklift.  This exposed the employees to the hazards of falling over 10 feet and/or failure of the forklift.
Recent events (2)
  • · I (S) $0
  • · Z (S) $0

1926.602 C01 I

Other-than-serious 1 instance 3 exposed
Issued
Mar 21, 2013
Abate by
Apr 12, 2013
Penalty
Initial $0 · Current $0
29 CFR 1926.602(c)(1)(i):     Lifting and hauling equipment did not have the rated capacity clearly posted on the vehicle so as to be clearly visible to the operator:    South side of the building:  On or about November 7, 2012, employees installed sheet metal panels on the side of a systems engineered metal building from a rough terrain forklift supported platform.  The forklift did not have load range charts.
Recent events (2)
  • · I (O) $0
  • · Z (O) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 337534416.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.