OSHA Inspection: EDGEWATER FRP DOOR

Issued

Feb 20, 2013

Abate by

Apr 10, 2013

Penalty

Initial $2,000 · Current $1,500 Reduced

General-duty citation text

29 CFR 1910.107(b)(2): The interior surfaces of the spray booth were not smooth and continuous and otherwise designed to prevent pocketing of residues and facilitate cleaning and washing without injury:     a) On or about November 27, 2012 the metal channels hanging from the interior of the spray booth had dried residue on them, allowing more residue to collect on the piping, creating a potential fire hazard.      b) On or about November 27, 2012 the ceiling in the spray booth was not smooth to facilitate the removal of paint residue.      Abatement Certification and Abatement Documentation Required.

Issued

Feb 20, 2013

Abate by

Mar 4, 2013

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.107(g)(2): All spraying areas were not kept as free from the accumulation of deposits of combustible residues as practical, with cleaning conducted daily if necessary:      a) The inside of the spray booth was not cleaned on a frequent basis to ensure that deposits of combustible residues did not accumulate on walls and other surfaces creating a potential fire hazard.       Abatement Certification and Abatement Documentation Required.

Issued

Feb 20, 2013

Abate by

Mar 4, 2013

Penalty

Initial $2,000 · Current $0 Reduced

General-duty citation text

29 CFR 1910.107(b)(9): A clear space of not less than 3 feet on all sides was not kept free from storage or combustible construction:    a) On or about November 27, 2012 the space immediately around the spray booth was not kept free from storage, including a 55 gallon drum of acetone.     Abatement Certification and Abatement Documentation Required.

Issued

Feb 20, 2013

Penalty

Initial $1,700 · Current $1,000 Reduced

General-duty citation text

29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s):     a) The adjustable guard on the ten inch (10") Black and Decker miter saw was removed, exposing the point of operation while the saw was operated.      b) The Delta table saw used in the fabrication area did not have the adjustable guard installed while employees were cutting materials.      No Abatement Certification or Abatement Documentation Required.