DOUBLE SPRINGS, AL —
OSHA Inspection: RONNIE'S LUMBER MILL, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of RONNIE'S LUMBER MILL, INC. in 16828 HIGHWAY 278, DOUBLE SPRINGS, AL 35553 (NAICS 321113). OSHA activity number 337610810.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- RONNIE'S LUMBER MILL, INC.
- Site address
- 16828 HIGHWAY 278
- City
- DOUBLE SPRINGS
- State
- AL
- ZIP
- 35553
- Mailing
- 16828 HIGHWAY 278, DOUBLE SPRINGS, AL 35553
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321113
- Employees
- 20
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.147 C01
- Issued
- Jan 2, 2013
- Abate by
- Jan 10, 2013
- Penalty
- Initial $2,040 · Current $1,020 Reduced
General-duty citation text
29 CFR 1910.147(c)(1): The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative: a) On or about November 27, 2012 - a LOTO program had not been established for employees that perform service, maintenance, or cleaning on equipment such as the Resaw, Trim saw, and Edge saw.
Recent events (2)
- — I (S) $1020
- — Z (S) $2040
1910.265 C18 II
- Issued
- Jan 2, 2013
- Abate by
- Jan 8, 2013
- Penalty
- Initial $1,700 · Current $850 Reduced
General-duty citation text
29 CFR 1910.265(c)(18)(ii): Spiked live rolls on live roll conveyor(s) were not guarded: a) On or about November 27, 2012 - On the Southeast corner near the back stairwell, the conveyor system that transports logs from the edge saw to the trim saw had a chain and sprocket that was not guarded. b) On or about November 27, 2012 - On the Northeast corner at the green chain stacking area, the conveyor that transports logs from the trim saw to the the stacking area had a chain and sprocket that was not guarded.
Recent events (2)
- — I (S) $850
- — Z (S) $1700
1910.265 E04 II A
- Issued
- Jan 2, 2013
- Abate by
- Jan 10, 2013
- Penalty
- Initial $1,700 · Current $850 Reduced
General-duty citation text
29 CFR 1910.265(e)(4)(ii)(a): Trimmer saw(s) were not guarded in front by adequate baffles to protect against flying debris: a) On or about November 27, 2012 - Trim saw, did not have a baffle installed to prevent flying debris while cutting.
Recent events (2)
- — I (S) $850
- — Z (S) $1700
1910.265 E04 II B
- Issued
- Jan 2, 2013
- Abate by
- Jan 8, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.265(e)(4)(ii)(b): End saws on trimmer saw(s) were not guarded: a) On or about November 27, 2012 - Trim saw was not equipped with a guard.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.303 B07 I
- Issued
- Jan 2, 2013
- Penalty
- Initial $1,020 · Current $510 Reduced
General-duty citation text
29 CFR 1910.303(b)(7)(i): Unused openings in boxes, raceways, auxiliary gutters, cabinets, equipment cases, or housings were not effectively closed to afford protection substantially equivalent to the wall of the equipment. a) On or about November 27, 2012 - Entrance to the sawmill, two electrical boxes had openings that were not covered.
Recent events (2)
- — I (S) $510
- — Z (S) $1020
More inspections at Ronnie'S Lumber Mill, INC.
View Ronnie'S Lumber Mill, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 321113)
More inspections in AL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 337610810.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.