Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: BLOUNT COUNTY FARMERS COOPERATIVE, INC.

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of BLOUNT COUNTY FARMERS COOPERATIVE, INC. in 810 SECOND AVENUE EAST ONEONTA, ONEONTA, AL 35121 (NAICS 444220). OSHA activity number 337620421.

Watch Blount County Farmers Cooperative, INC. — free Get an email when a new federal OSHA severe-injury report for Blount County Farmers Cooperative, INC. is published. One employer, no account, unsubscribe in one click.
Site address
810 SECOND AVENUE EAST ONEONTA
City
ONEONTA
State
AL
ZIP
35121
Mailing
810 SECOND AVENUE EAST, ONEONTA, AL 35121
Inspection type
Referral (C)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
444220
Employees
9
Ownership type
A

7 citations on file for this inspection.

1910.23 C01

Serious Gravity 5 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $1600.00 · Current $960.00 Reduced
29 CFR 1910.23(c)(1): Open-sided floors and/or platforms four feet or more above adjacent floor or ground level were not guarded with standard railings (or equivalent) and toeboards:      (a) On or about 11/2/12 - Warehouse, a platform used to access the storage area above the main show room did not have a standard guardrail installed exposing employees to an 11-foot fall.
Recent events (2)
  • — I (S) $960
  • — Z (S) $1600

1910.219 D01

Serious Gravity 10 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $2800.00 · Current $1680.00 Reduced
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o):      (a) On or about 11/20/12 - Bulk Fertilizer Area, the pulleys on the conveyor motor used to transfer fertilizer and other bulk items was not guarded.
Recent events (2)
  • — I (S) $1680
  • — Z (S) $2800

1910.219 E03 I

Serious Gravity 10 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.219(e)(3)(i): Vertical or inclined belt(s) were not enclosed by guard(s) conforming to the requirements specified at 29 CFR 1910.219(m) and (o):      (a) On or about 11/20/12 - Bulk Fertilizer Area, the belt on the conveyor motor used to transfer fertilizer and other bulk items was not guarded.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.303 B01 II

Serious Gravity 5 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $1600.00 · Current $960.00 Reduced
29 CFR 1910.303(b)(1)(ii): Electrical equipment was not free from recognized hazards, based on the mechanical strength and durability, including, for parts designed to enclose and protect other equipment, the adequacy of the protection thus provided:      (a) On or about 11/20/12 - Bulk Fertilizer Loading Area, the protective conduit was broken on a Kraus Mixer/Blender exposing the insulated wires.
Recent events (2)
  • — I (S) $960
  • — Z (S) $1600

1910.303 B02

Serious Gravity 5 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $1600.00 · Current $960.00 Reduced
29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling:      (a) On or about 11/20/12 - Feed Warehouse Area, the cord servicing a Skil saw was spliced together.
Recent events (2)
  • — I (S) $960
  • — Z (S) $1600

1910.305 B02

Serious Gravity 5 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $1600.00 · Current $960.00 Reduced
29 CFR 1910.305(b)(2): Each outlet box in completed installations did not have a cover, faceplate, or fixture canopy:      (a) On or about 11/20/12 - Feed Warehouse Area, a 110-volt branch circuit receptacle was missing the faceplate.
Recent events (2)
  • — I (S) $960
  • — Z (S) $1600

1910.305 G02 III

Serious Gravity 5 2 instances 4 exposed
Issued
Abate by
Penalty
Initial $1600.00 · Current $960.00 Reduced
29 CFR 1910.305(g)(2)(iii): Flexible cords were not connected to devices and fittings so that tension would not be transmitted to joints or terminal screws:      (a) On or about 11/20/12 - Bulk Fertilizer Area, an extension cord being used to service a conveyor did not have strain relief at the plug.    (b) On or about 11/20/12 - Bulk Fertilizer Area, a cord being used to service the conveyor motor did not have strain relief going into the motor control box mounted on the side of the motor.
Recent events (2)
  • — I (S) $960
  • — Z (S) $1600

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 337620421.