HUNTSVILLE, AL —
OSHA Inspection: ADEPT TECHNOLOGIES, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of ADEPT TECHNOLOGIES, INC. in 2865 WALL TRIANA HWY, HUNTSVILLE, AL 35824 (NAICS 332111). OSHA activity number 337630420.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ADEPT TECHNOLOGIES, INC.
- Site address
- 2865 WALL TRIANA HWY
- City
- HUNTSVILLE
- State
- AL
- ZIP
- 35824
- Mailing
- 2865 WALL TRIANA HWY, HUNTSVILLE, AL 35824
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332111
- Employees
- 60
- Ownership type
- A
Citations
4 citations on file for this inspection.
5(a)(1)
- Issued
- Jan 28, 2013
- Abate by
- Feb 14, 2013
- Penalty
- Initial $4,900 · Current $3,500 Reduced
General-duty citation text
OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to crushed-by hazards: a) On or about 11/28/12 - Plant area, the Caterpillar Model T125D forklift was being operated without seat belts installed. b) On or about 11/28/12 - Plant area, the Hyster Spacesaver 20 forklift was being operated without seat belts installed.
Recent events (2)
- — I (S) $3500
- — Z (S) $4900
1910.212 A01
- Issued
- Jan 28, 2013
- Abate by
- Feb 14, 2013
- Penalty
- Initial $2,800 · Current $1,800 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) On are about 11/28/12 - CNC Machine Shop area, the c huck on the Victor lathe was not guarded.
Recent events (2)
- — I (S) $1800
- — Z (S) $2800
1910.242 B
- Issued
- Jan 28, 2013
- Abate by
- Feb 7, 2013
- Penalty
- Initial $4,200 · Current $2,750 Reduced
General-duty citation text
29 CFR 1910.242(b): Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i. a) On or about 11/28/12 - CNC Machine Shop, air nozzles were being used at approximately 60 p.s.i.
Recent events (2)
- — I (S) $2750
- — Z (S) $4200
1910.147 C04 I
- Issued
- Jan 28, 2013
- Abate by
- Feb 14, 2013
- Penalty
- Initial $4,200 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: a) On are about 11/28/12 - Energy control procedures had not been developed for machinery such as the CNC machines.
Recent events (2)
- — I (S) $0
- — Z (S) $4200
More inspections in this industry (NAICS 332111)
More inspections in AL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 337630420.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.