BELLEVILLE, NJ —
OSHA Inspection: BINDI NORTH AMERICA
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of BINDI NORTH AMERICA in 507 MAIN STREET, BELLEVILLE, NJ 07109 (NAICS 311813). OSHA activity number 337652812.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- BINDI NORTH AMERICA
- Site address
- 507 MAIN STREET
- City
- BELLEVILLE
- State
- NJ
- ZIP
- 07109
- Mailing
- 507 MAIN STREET, BELLEVILLE, NJ 07109
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 311813
- Employees
- 50
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.147 C01
- Issued
- Dec 5, 2012
- Abate by
- Feb 9, 2013
- Penalty
- Initial $3,500 · Current $2,275 Reduced
General-duty citation text
29 CFR 1910.147(c)(1): The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative: a) Establishment - 507 Main Street, Belleville,NJ The employer's lockout/tagout program was not fully developed and implemented by the employer, where employees maintain/service machinery and equipment, including but not limited to Unifiller main line pneumatic and electric conveyor, San Cassiano pneumatic mixers, and other machinery in the establishment. Violation occurred on or about 11/28/2012.
Recent events (2)
- — I (S) $2275
- — Z (S) $3500
1910.147 C07 I
- Issued
- Dec 5, 2012
- Abate by
- Feb 9, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(7)(i): The employer did not provide training to ensure that the purpose and function of the energy control program are understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls are acquired by employees: a) Establishment - 507 Main Street, Belleville, NJ Employee(s) required to perform maintenance, service and repair to equipment, such as but not limited to the conveyor line and mixer equipment, were not provided training on energy control procedures. Violation occurred on or about 11/28/2012.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.215 A01
- Issued
- Dec 5, 2012
- Abate by
- Dec 13, 2012
- Penalty
- Initial $2,100 · Current $1,365 Reduced
General-duty citation text
29 CFR 1910.215(a)(1): Abrasive wheel(s) used on grinding machinery were not used with safety guard. a) Establishment - Maintenance Room: The Dayton 6" Bench Grinder was being used without safety guards. Violation occurred on or about 11/28/2012.
Recent events (2)
- — I (S) $1365
- — Z (S) $2100
1910.215 A04
- Issued
- Dec 5, 2012
- Abate by
- Dec 13, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(a)(4): Grinding machinery was not used with work rest(s) to support offhand grinding work. a) Establishment - Maintenance Room: The work rest for the Dayton 6" Bench Grinder was missing. Violation occurred on or about 11/28/2012.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.215 B09
- Issued
- Dec 5, 2012
- Abate by
- Dec 13, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: a) Establishment - Maintenance Room: The Dayton 6" Bench Grinder was being used without a tongue guard in place. Violation occurred on or about 11/28/2012.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1904.29 B01
- Issued
- Dec 5, 2012
- Abate by
- Dec 24, 2012
- Penalty
- Initial $700 · Current $455 Reduced
General-duty citation text
29 CFR 1904.29(b)(1): A log of all recordable work-related injuries and illnesses (OSHA Form 300 or equivalent) was not completed in the detail required by the regulation: a) Establishment - 507 Main Street, Belleville, NJ: Calender Year 2012 OSHA Form 300 Case # 1 - Column F does not include a description of the object/substance that directly injured or made the person ill. Violation occurred on or about 11/28/2012. b) Establishment - 507 Main Street, Belleville, NJ: Calender Year 2012 OSHA Form 300 Case # 1 - Column K does not include the number of days the injured employee was away from work. Violation occurred on or about 11/28/2012.
Recent events (2)
- — I (O) $455
- — Z (O) $700
More inspections in this industry (NAICS 311813)
More inspections in NJ
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 337652812.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.