DECATUR, AL —
OSHA Inspection: TRUCKERS WAREHOUSE, INC.
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of TRUCKERS WAREHOUSE, INC. in 748 HIGHWAY 67 SOUTH, DECATUR, AL 35603 (NAICS 423120). OSHA activity number 337689624.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- TRUCKERS WAREHOUSE, INC.
- Site address
- 748 HIGHWAY 67 SOUTH
- City
- DECATUR
- State
- AL
- ZIP
- 35603
- Mailing
- P.O. BOX 1118, DECATUR, AL 35602
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 423120
- Employees
- 3
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.215 A02
- Issued
- Feb 12, 2013
- Penalty
- Initial $1,600 · Current $800 Reduced
General-duty citation text
29 CFR 1910.215(a)(2): Abrasive wheel(s) used on grinding machinery were not provided with safety guard(s) which covered the spindle end, nut, and flange projections: (a) On or about December 5, 2012 - Maintenance Shop, Baldor Bench Grinder, SN W1184, the spindle end, nut, flange projections and wheel were not covered with a safety guard.
Recent events (2)
- — I (S) $800
- — Z (S) $1600
1910.215 A04
- Issued
- Feb 11, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(a)(4): Work rests were not kept adjusted closely to the wheel with a maximum opening of one-eighth inch to prevent the work from being jammed between the wheel and the rest, which may cause wheel breakage: (a) On or about December 5, 2012 - Maintenance Shop, Baldor Bench Grinder, SN W1184, the work rest was located at approximately one-half inch from the wheel.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.215 B09
- Issued
- Feb 11, 2013
- Abate by
- Feb 22, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(b)(9): Guard for abrasive wheel machine where the operator stands in front of the machine was not constructed so that the peripheral protecting member could be adjusted to the constantly decreasing diameter of the wheel: (a) On or about December 5, 2012 - Maintenance Shop, Baldor Bench Grinder, SN W1184, the grinder was not provided with an adjustable tongue.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.37 B02
- Issued
- Feb 11, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.37(b)(2): Each exit was not clearly visible and marked by a sign reading "Exit": (a) On or about December 5, 2013 - Maintenance Shop, one exit door was not marked.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.132 D02
- Issued
- Feb 11, 2013
- Abate by
- May 15, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.132(d)(2): The employer did not verify that the required workplace hazard assessment has been performed through a written certification that identifies the workplace evaluated, the person certifying that the evaluation has been performed, the date(s) of the hazard assessment, and, which identifies the document as a certification of hazard assessment: (a) On or about December 5, 2012 - Maintenance Shop, no written certification to verify the hazard assessment had been performed.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.157 E02
- Issued
- Feb 11, 2013
- Abate by
- Mar 16, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.157(e)(2): Portable extinguishers or hose used in lieu thereof under paragraph (d)(3) of this section were not visually inspected monthly: (a) On or about December 5, 2012 - Maintenance Shop and Storage Building, portable fire extinguishers were not visually inspected every month.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.1200 E01
- Issued
- Feb 11, 2013
- Abate by
- May 15, 2013
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met: (a) On or about December 5, 2012 - Maintenance Shop, a written hazard communication program had not been developed and implemented for a welder exposed to hazardous chemicals such as manganese, aluminum, and iron oxide fumes generated from the MIG welding operations.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Truckers Warehouse, INC.
View Truckers Warehouse, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 423120)
More inspections in AL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 337689624.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.