OSHA Inspection: G & G CONSTRUCTION CO OF IN

Issued

Jan 11, 2013

Abate by

Jan 17, 2013

Penalty

Initial $2,800 · Current $1,960 Reduced

General-duty citation text

29 CFR 1926.501(b)(13):  "Residential construction." Each employee engaged in residential construction activities 6 feet (1.8 m) or more above lower levels shall be protected by guardrail systems, safety net system, or personal fall arrest system unless another provision in paragraph (b) of this section provides for an alternative fall protection measure. Exception: When the employer can demonstrate that it is infeasible or creates a greater hazard to use these systems, the employer shall develop and implement a fall protection plan which meets the requirements of paragraph (k) of 1926.502.  Note: There is a presumption that it is feasible and will not create a greater hazard to implement at least one of the above-listed fall protection systems. Accordingly, the employer has the burden of establishing that it is appropriate to implement a fall protection plan which complies with 1926.502(k) for a particular workplace situation, in lieu of implementing any of those systems.    G & G Construction Co of IN had employees exposed to 10 and 12 ft. fall hazards without fall protection, while performing framing operations at a construction site in Champaign, Illinois.

Issued

Jan 11, 2013

Abate by

Jan 24, 2013

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1926.503(a)(1):  The employer shall provide a training program for each employee who might be exposed to fall hazards. The program shall enable each employee to recognize the hazards of falling and shall train each employee in the procedures to be followed in order to minimize these hazards.    G & G Construction Co of IN had employees exposed to 10 and 12 ft. fall hazards without fall protection, while performing framing operations at a construction site in Champaign, Illinois.   The employer did not provide construction safety training to employees, in order to provide them with the knowledge necessary to recognize the hazards of falling and the safety requirements associated with fall protection, as well as the proper work procedures to follow, in order to minimize and eliminate the fall hazards.